MINWAX® Ultimate Floor Finish
3Pages

{{requestButtons}}

Catalog excerpts

MINWAX® Ultimate Floor Finish - 1

Technical Data Sheet MINWAX® Ultimate Floor Finish DESCRIPTIONS: Minwax® Ultimate Floor Finish is a technologically advanced, durable topcoat for floors that provides exceptional levels of floor durability in a crystal clear finish. The self-crosslinking technology provides a tough floor finish that is great for any hardwood floor where you want a finish that you can recoat in only two hours, and which does not require sanding between coats. Minwax® Ultimate Floor Finish does not amber over time, which makes it especially good for use over light colored woods and stains. Minwax® Ultimate Floor Finish dries quickly, so you can complete your floor finishing project in just one day. It works over Minwax® Wood Finish™ stain, over bare wood, and over existing polyurethane finishes. It dries quickly, is lower in odor than traditional solvent-based polyurethanes, and cleans up with soap and warm water. For Interior Use Only RECOMMENDED USE: Designed for interior residential and commercial wood floors. SURFACE PREPARATION: WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority. SAND THE FLOOR Whether you have a bare wood floor, or a wood floor that already has a finish on it, you will need to sand the floor to prepare it for finishing. Rent or purchase a floor sander. Follow the sander manufacturer’s directions to prepare your floor. You will need to sand your floor down to bare wood if: • You’d like to change the color of your floor, or • Your floor’s finish is cracking, peeling, or completely worn away in areas, or • Shellac, lacquer, wax, or products containing wax or stearates have been applied to the floor. You can do a “screen and recoat” if: • You do not want to change the color of your floor. • Your existing finish is in good condition, with no chipping, peeling, or worn through areas, and • Shellac, lacquer, wax, or products containing wax or stearates have not been applied to the floor. For a “screen and recoat”, there’s no need to remove your existing floor finish. Instead, you can simply “screen” the existing finish to prepare it for the addition of new finish. For all floors, follow the sander manufacturer’s directions for your type of project. Remove all sanding dust. Thoroughly wipe the wood with a clean, damp cloth to get rid of any remaining dust. Allow the wood to dry completely. Apply Minwax® Wood Finish™ Stain (Optional) If you have sanded the floor down to bare wood, or you have a new, unfinished wood floor, and you’d like to add color to it, you’ll need to stain the floor. Sand and prepare the floor per the sander manufacturer’s directions, ending with 100 grit sandpaper or equivalent. Remove all dust. Apply Minwax® Wood Finish™ Stain per the directions on the Wood Finish can. Wait 24 hours for the stain to dry, and then apply

Open the catalog to page 1
MINWAX® Ultimate Floor Finish - 2

Technical Data Sheet MINWAX® Ultimate Floor Finish Note: For bare floors made of white oak, apply Minwax® Sanding Sealer before applying Minwax® Ultimate Floor Finish. This seals the wood and prevents a possible tannin reaction (discoloration). Coverage: Approximately 500 square feet per gallon. Storage: Store at room temperature. Keep from freezing. APPLICATION NOTES: APPLY MINWAX® ULTIMATE FLOOR FINISH • Before use, stir Minwax® Ultimate Floor Finish to rotate the product from the bottom to the top of the can. • Apply a thin coat using a new synthetic pad applicator. Maintain a wet edge...

Open the catalog to page 2
MINWAX® Ultimate Floor Finish - 3

Technical Data Sheet MINWAX® Ultimate Floor Finish CLEANUP/STORAGE: Clean application tools with warm water immediately after use. STORAGE: Store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. Product is unusable if frozen. SAFETY: CAUTIONS: Use only with adequate ventilation. To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches, or dizziness, increase fresh air, or wear respiratory protection (NIOSH approved) or leave...

Open the catalog to page 3

All Sherwin-Williams catalogs and technical brochures

Archived catalogs

  1. Resilience

    2 Pages

  2. WoodClassics

    6 Pages

  3. Bath Paint

    2 Pages

  4. E-Barrier

    4 Pages

  5. Promar 700

    2 Pages

  6. Promar 400

    2 Pages

  7. Promar 200

    2 Pages

  8. Proclassic

    2 Pages

  9. Superpaint

    2 Pages

  10. Cashmere

    2 Pages

  11. Harmony

    2 Pages