Seplux 10
4Pages

TECHNICAL DATA THE POL YCARBONATE PANEL SEPLUX

TECHNICAL CHARACTERISTICS Modular tongue-and-groove Panel in co-extruded multi-wall polycarbonate (UV-protected on one side) - GUARANTEED 10 YEARS against ageing. The high resistance performance, ease of installation, the particular tongue-and-groove joint structure, the perfectly coplanar panels and their assembly without the need for accessories, make this the ideal product for interior false ceilings (canopies), mini-sheds and small roofs. TECHNICAL DATA Panel section maximum transportable Light transmission Heat transmittance Minimum bending radius Linear expansion Service temperature...

ATTENTION: the load bearing strength depends on the crossbeam pitch of the supporting structure: the shorter the pitch, the higher the strength. The maximum allowable load however is 80 kg/m². Thanks to their characteristics, SepLux 10 panels are particularly suited for small roof with a slight slope (minimum allowable slope 18%). As for vertical applications, fastening is done using stainless steel hooks at maximum pitch 80 cm (40 cm at both ends of the structure). Stainless steel hook for vertical fastening Detail of panel groove with stainless steel hook locked in ROOF SLOPE 20% ROOF...

SEPLUX 10 VERTICAL Up to 120 cm. Thanks to the particular form of its joint, the SepLux 10 panel can also be used for vertical surfaces (small vertical glazing - mini sheds etc) of maximum height 1,20 m single span. In the case of greater heights, a structure must be provided (wood, steel) to which the panels are fastened with stainless steel hooks supplied by SEP. Detail of the panel joint. Free span SPECIFICATION Supply of small strip windows in modular co-extruded multi-wall polycarbonate panels width 750 mm, UV protected on one side. Thickness 10 mm, coplanar and double chamber, with...