12.1 Schlüter® -KERDI-BOARD
12Pages

INNOVATIVE PROFILES UNIVERSAL STRUCTURAL PANEL, BONDED WATERPROOFING tional tile substrate for wall areas, which can be used for creating bonded waterproofing assemblies with tile coverings. Additionally, the product has many uses as a structural It consists of an extruded hard foam panel, with a special reinforcement material on both sides and fleece webbing for effective anchoring In the tile adhesive. With the available panel thicknesses of 5, KERDI-BOARD covers a broad range of application areas for creating level, waterproof substrates for the Installation of ceramic and natural stone tiles. With suitable preparation of the joint areas, the structural panel may be used for officially approved bonded waterproofing assemblies. creating tile substrates on green masonry, existing substrates of all kinds and stud frames made of wood or metal; creating straight or curved separating walls; conceal- ing wall mounted Installations and piping (pipe boxes); creating straight or curved bathtub and shower surrounds; as well as creating work surfaces, vanities, storage shelves or any other bathroom structures. The material Is equally suitable for creating level substrates In floor renovation projects e.g. residential bathroom Installations designed for foot traffic. size with a utility knife. The grldllnes printed on the surface are helpful for neat and quick adhered In wall areas or alternatively attached with dabs of thin-bed mortar or another suitable adhesive or mortar. If necessary, the material may be secured with additional wall anchors. In the case of stud frames made of wood or metal, Schluter®-KERDI-BOARD is attached with screws from the matching hardware system. Tiles can be Installed directly over Schlüter®- KERDI-BOARD using the thin-bed method, but other suitable trowel applied coverings or plaster layers are equally possible. Angle and U shaped components for pipe panelling and grooved Schluter®-KERDI- BOARD panels for example are available for creating curved features. Schlüter-Systems also offers profiles and attachment hardware for wall connections and finishing edges, as well as matching wall anchors and screws.

Schlüter®-KERDI-BOARD is made from an extruded XPS hard foam, with a cement free reinforcement layer laminated onto both sides, together with an anchoring fleece webbing. The surface of the board has grldllnes consisting of 10 x 10 mm squares Material properties and areas of can withstand all chemical stresses that typically occur In conjunction with ceramic tile coverings. Schluter®-KERDI-BOARD may be used in bonded waterproofing assemblies where required. Test certificates (abP- German Certificate of National Techni- cal Approval) for load classes A1, A2 and C are available. These...

substrate, additional mechanical attachment with the corresponding wall anchors or Note: See section "Waterproofing" on the waterproofing assemblies. stud frame structures Installed and screw mounted vertically structed stud frames. If using the system fixings, the panels may be tightly abutted when fixing the screws. The selected screws should be of sufficient length to reach a depth of at least 20 mm in wooden studs and at least 10 mm in metal studs. The distance between the screws should not exceed 25 cm. Depending on the project requirements, the panel thickness for Installation on stud...

Note: See section "Waterproofing" on the waterproofing assemblies. Curved wall areas made of Schlüter®- 1. The grooved version of the Schlüter®- KERDI-BOARD panel is designed for creating rounded and curved struc- 2. First, cut the grooved panels to the required size. If a larger expanse of panels Is required, several panels can be connected along the edges with double sided adhesive tape. 3. If the grooved surface points toward the Inside, It is recommended to fill the grooves with tile adhesive prior to 4. Exterior grooves should be filled with thin-bed mortar prior to or during the tile...

Schlüter®-KERDI-BAND is also suitable for creating functional connections to fixed structural elements such as door openings or windows of metal, wood or plastic. For this purpose, apply Schluter®-KERDI-FIX on the adhesive area of the fixed structures andSchluter®-KERDI-COLLonthe adhesive area of Schluter®-KERDI-BOARD and cover the entire joint area with sealing band. built In components must be verified in each Individual case. The feasibility of the con- nections must be evaluated on the basis of individual construction requirements. Imple- ment all connections with great care. Separate...

Product Overview can be used as a substrate and a universal structural panel, as well as In bonded waterproofing assemblies. Schlüter®-KERDI-BOARD-E Is an angle component to create corner formations and pipe panelling. Schlüter®-KERDI-BOARD-U Is a U shaped component to create pipe panelling. Note: U shaped components may be divided Into two angle components. Schlüter®-KERDI-BOARD-V Is a vertically grooved sub- strate and construction panel for creating tile coverings with curved Installation substrates.

stainless steel angle profile with two trapezoid perforated anchoring legs. It Is used for fastening and stabilising structures made of Schlüter®-KERDI-BOARD panels. It Is either attached with screws or thin-bed adhesive. Schlüter^-KERDI-BOARD-ZC is a U shaped profile of brushed stainless steel with one perforated anchoring leg. It is particularly suited for finishing the edges of work surfaces, vanities and similar structures. Accessories Profile Corner Connector Schlüter®-KERDI-BOARD-ZA is a U shaped profile of brushed stainless steel with two perforated anchoring legs. It is suited for...

Schlütet®-KERDI-BOARD-ZT are fixing washers made of galvanised steel or stainless steel for the attachment of Schluter®-KERDI-BOARD to stud frame structures with Galvanised Stainless steel Schlüter®-KERDI-BOARD-ZS are quick Installation screws for the attachment of Schlüter®-KERDI-BOARD to stud frame structures. 3.5 X 35 mm with self tapping tip (for wood 3.5 X 55 mm with self tapping tip (for wood 4.2 X 75 mm with coarse threading (for wooden structures)_ Schlüter®-KERDI-BOARD-ZDK Is a double sided adhe- sive tape forthe attachment of Schluter®-KERDI-BOARD panels in joint areas or similar....