RS
15Pages

Catalog excerpts

10/03 - 2 Construction subject to change. Version: 09.04.2019 No return possible!

Duct silencer RS Description Silencing of the duct silencer type RS in accordance with the absorption principle is done by means of an annular chamber filled with mineral wool according to DIN 4102 A2 non-flammable, mineral wool with glass silk cover. The RSM type contains an additional central baffle with mineral wool filling and glass silk cover, which is covered with a galvanised perforated sheet in abrasion-resistant manner toward the air flow. For maintenance, service, retrofitting, etc., inspection openings in sufficient number and size must be provided on-site. Construction Outer...

Open the catalog to page 3

Duct silencer RS Models and dimensions Dimensions RS-N-... Available sizes Selection chart packing thickness - = Special model, only upon request Construction subject to change.

Open the catalog to page 4

Selection chart packing thickness - = Special model, only upon request Construction subject to change.

Open the catalog to page 5

Duct silencer RS Dimensions of accessories Metu flange (-MF...) / counter flange (-GF...) (pair) loose / tension ring (-SR...) (pair) loose on both sides Rubber lip seal (-GD1) Detail X Please note! Tension rings and counter flanges must be ordered separately and are supplied loose! Flat flange (-FF...), on both sides according to DIN 24 154/5 Available sizes flat flange (-FF...) Construction subject to change.

Open the catalog to page 6

Technical data Pressure loss and velocity RS-N-..., L=500, without central baffle RS-N-..., L=950, without central baffle RS-N-..., L=1450, without central baffle RS-N-..., L=1950, without central baffle Construction subject to change.

Open the catalog to page 7

Duct silencer RSPressure loss and velocity RS-M-..., L=950, with central baffle RS-M-..., L=1950, with central baffle Construction subject to change.

Open the catalog to page 8

RS-N-...-50, L=500, without central baffle RS-N-...-100, L=500, without central baffle RS-N-...-50, L=950, without central baffle RS-N-...-100, L=950, without central baffle RS-N-...-150, L=950, without central baffle Construction subject to change.

Open the catalog to page 9

Duct silencer RSInsertion lossRS-N-...-50, L=1450, without central baff e RS-N-...-50, L=1950, without central baff e Version: 09.04.2019 Construction subject to change. No return possible!

Open the catalog to page 10

Duct silencer RSInsertion lossRS-M-...-50, L=950, with central baffle 10/03 - 11 Version: 09.04.2019 Construction subject to change. No return possible!

Open the catalog to page 11

Duct silencer RSFlow generated noise (S/Ul) SA The flow generated noise in each octave band must be 7 to 10 dB lower than the reduced noise behind the silencer. Correction factor Supply air volume Supply air volume Pressure loss Frequency Length Nominal width Insertion loss Packing thickness Velocity in the free cross-section of the silencer Weighted sound power level Sound power level / octave Baffle thickness Construction subject to change.

Open the catalog to page 12

Rigid duct silencer I without central baffle I length 500 mm I nominal width 71 mm I packing thickness 50 mm I without central baffle I galvanised sheet steel I without paint I without rubber lip seal / without flange Order details 01 - Type RS = Rigid duct silencer 02 - Model N = without central baffle (standard) M = with central baffle (available from NW350 mm) 03 - Length 0500 = Length 500 mm (only possible with model RS-N) 0950 = Length 950 mm 1450 = Length 1450 mm 1950 = Length 1950 mm Construction subject to change.

Open the catalog to page 13

Duct silencer RS 06 - Baffle thickness 000 = without central baffle (only possible with model 07 - Material SV = Galvanised sheet steel (standard) 08 - Paint 0000 = Without paint (standard) 09 - Duct connection KA0 = without rubber lip seal / without flange (standard) GD1 = with rubber lip seal MF1 = Metu flange, on both sides, galvanised sheet steel FF1 = Flat flange, on both sides, galvanised sheet steel (not possible for NW 71, 90,112 and 350) Please note! Tension rings and counter flanges must be ordered separately and are supplied loose! Construction subject to change.

Open the catalog to page 14

Duct silencer RS Specification texts Duct silencer type RS with sound absorption according to the absorption principle, by means of an annular chamber filled with mineral wool according to DIN 4102 A2 non-flammable, mineral wool with glass silk cover. Consisting of 1.0 mm thick outer jacket with a perforated plate covered in abrasion-resistant manner toward the air flow direction. Connection to the duct via 50 mm long connection pieces. Product: SCHAKO type RS-N-... - additionally with central baffle with mineral wool filling and glass silk cover. Product: SCHAKO type RS-M-... - Outer...

Open the catalog to page 15

RS 15Pages

Catalog excerpts

All SCHAKO KG catalogs and technical brochures

RS
15Pages