Website:
SCHAKO KG
Group: SCHAKO Group
Catalog excerpts
Air diffuser system Model AUDIX®-AW
Open the catalog to page 1
04/08 - 2 Construction subject to change. Version: 27.03.2018 No return possible!
Open the catalog to page 2
Air Diffuser System Model AUDIX®-AW Description Modern office buildings are often built without suspended ceilings. This opens up a saving potential regarding the floor heights. This means that the same building height can accommodate more floors. To provide the possibly cheapest office space creates conflicts with the demand for comfort. Therefore, to reduce the room temperatures, in some cases component cooling systems are used for the ground load cooling. According to the thermal isolation regulations, an air-conditioning installation is demanded for dense facades, to prevent building...
Open the catalog to page 3
Air Diffuser System Model AUDIX®-AW Characteristics of each slot diffuser: AUDIX®-AW-...-DSX: The air outflow direction can also be adjusted even after installation of the diffuser. In doing so, the free cross-section always remains constant. Likewise, the pressure loss and noise level do not change. A subsequent adjustment of the air jet pattern to changed room conditions is possible. For adjustment, single blades must be taken out and put back turned into the required air direction. The stable air jet means that the diffuser is suitable for VAV systems. AUDIX®-AW-...-DSX-XXL-W: The air...
Open the catalog to page 4
Air Diffuser System Model AUDIX®-AW Model AUDIX®-AW-R - for installation in walls, with round connection pipe AUDIX®-AW-RE - for installation in walls, with rectangular connection pipe AUDIX®-AW-...-Z - only supply air AUDIX®-AW-...-A - only return air AUDIX®-AW-...-Z/A - for supply and return air AUDIX®-AW-...-DSX - with slot diffuser type DSX - 1- to 4-slot - with narrow frame profile (-P) or wide frame profile (PB) AUDIX®-AW-...-DSX-XXL-W - with slot diffuser type DSX-XXL-W - 1- to 2-slot - with narrow frame profile (-P) or wide frame profile (PB) AUDIX®-AW-...-DSC - with slot diffuser...
Open the catalog to page 5
1.) For wall thicknesses >100 mm, a box neck extension (up to max. 260 mm) is required. View A for supply or return air (-Z or -A) II II View B for supply or return air (-Z or -A) Wall opening in the length: L+5 WO = wall opening Construction subject to change.
Open the catalog to page 6
Air Diffuser System Model AUDIX®-AW Diffuser models Detail X AUDIX®-AW-DSX-P, 1 to 4 slots Construction subject to change. Version: 27.03.2018 No return possibl
Open the catalog to page 7
Air Diffuser System Model AUDIX®-AW AUDIX®-AW-DSC, 1 and 2 slots Construction subject to change. Version: 27.03.2018 No return possibl
Open the catalog to page 8
Air Diffuser System Model AUDIX®-AW Dimensions of accessories Damper (-DK), with cable adjustment AUDIX®-AW-R Box neck extension (-KHV) AUDIX®-AW-R-KHV AUDIX®-AW-RE-KHV AUDIX®-AW-RE Cover (-ÖA) To prevent contamination or damage during assembly. Rubber lip seal (-GD) (only AUDIX®-AW-R) Detail W 04/08 - 9 Construction subject to change. Version: 27.03.2018 No return possi
Open the catalog to page 9
Air Diffuser System Model AUDIX®-AW Fastening methods Prong fastening (-BK, for AUDIX®-AW...-DSX / -DSX-XXL) The prong fastening (-BK) is always attached to the front (to the end pieces). Spring connection (-FM) for AUDIX®-...-DSC /-DSA) ® AUDIX -AW-...-DSC Installation Optimum installation The clearance between ceiling and upper edge of the diffuser must not exceed 0.5 m, otherwise no coanda effect is achieved! Installation of plenum box rotated AUDIX®-AW-R AUDIX -AW-...-DSA The spring connection (FM) is always attached to the diffuser on the longitudinal side. On request, the plenum box...
Open the catalog to page 10
Air Diffuser System Model AUDIX®-AW Technical data Maximum end velocity of jet AUDIX®-AW-DSX-...-1/2/3/4 Correction factors for maximum end velocity of jet DSX
Open the catalog to page 11
AUDIX®-AW-DSA-D-1 Construction subject to change. Correction factors for maximum end velocity of jet DSC Correction factors for maximum end velocity of jet DSA-D Slot lengths
Open the catalog to page 12
Air Diffuser System Model AUDIX®-AW AUDIX®-AW-DSA-VD-1 Correction factors for maximum end velocity of jet DSA-VD k factor Slot lengths 1200 mm 1000 mm 900 mm 800 mm 700 mm 600 mm 500 mm 400 mm DSA-VD positioned upwards x 0.87 x 1.00 x 1.07 x 1.14 x 1.28 x 1.42 x 1.55 x 1.66 DSA-VD positioned straight x 0.94 x 1.09 x 1.22 x 1.34 x 1.45 x 1.56 x 1.74 x 1.88 Maximum assembly dimension to achieve a coanda effect Nozzles positioned upwards Nozzles positioned straight 04/08 - 13 Construction subject to change. Version: 27.03.2018 No return possible!
Open the catalog to page 13
Correction factors for x-critical DSX AUDIX -AW-DSX-XXL-W-1/2 Correction factors for x-critical DSX-XXL-W Construction subject to change. Slot lengths
Open the catalog to page 14
Construction subject to change. Correction factors for x-critical DSC
Open the catalog to page 15
AUDIX -AW-DSA-VD-1 Correction factors for x-critical DSA-VD
Open the catalog to page 16
Construction subject to change. Correction factors for temperature ratio DSX-XXL-W
Open the catalog to page 17
Correction factors for induction ratio DSA-VD Supply air volume Supply air volume Supply air volume per metre of slot Supply air volume per metre of slot Supply air volume per metre of row Supply air volume per metre of row total air jet volume at point x total air jet volume at point x Horizontal and vertical throw Temperature difference between supply air temperature and room temperature (aTq = tZU -tR) Temperature difference at point x Supply air temperature Room temperature Maximum end velocity of jet Induction ratio (i = Vx / Vzu) Temperature ratio (TV = ATx / ATq ) Critical throw...
Open the catalog to page 18
Air Diffuser System Model AUDIX®-AW Ordering details Cross-talk sound attenuator Model AUDIX®-AW with round connection pipe -R with rectangular connection pipe -RE with slot diffuser with nozzles fixed with nozzles adjustable 1 row with special frame profile with standard frame profile with wide frame profile with narrow frame profile with wide frame profile with narrow frame profile with prong fastening -BK with spring connection -FM Rubber lip seal -GD (only AUDIX®-AW-R) Box neck extension -KHV Wall thickness >100 mm to max. 260 mm Order example: AUDIX®-AW-RE-Z-500-DSC 402 Unless stated...
Open the catalog to page 19All SCHAKO KG catalogs and technical brochures
-
AUDIX2 Pages
-
DISA4 Pages
-
UC-OH²2 Pages
-
IGA2 Pages
-
CDD2 Pages
-
FBS18 Pages
-
MINOPAB6 Pages
-
PIL23 Pages
-
MWS / MWK23 Pages
-
ERK-SO43 Pages
-
BKSYS18 Pages
-
MINODSA6 Pages
-
DKA6 Pages
-
LAQ11 Pages
-
VMPR/VMPQ29 Pages
-
BKA-EN79 Pages
-
CPL15 Pages
-
AUDIX®25 Pages
-
VREX26 Pages
-
VQEX17 Pages
-
VPEX18 Pages
-
SVA-FS11 Pages
-
NRWG22 Pages
-
COMBIDSC26 Pages
-
DSCXL17 Pages
-
DSCU18 Pages
-
DSCPL16 Pages
-
DSCP15 Pages
-
DSC37 Pages
-
DO10 Pages
-
VRAQ46 Pages
-
UEKU6 Pages
-
UEK6 Pages
-
SS-K6 Pages
-
DQJP9 Pages
-
VOLKOM6 Pages
-
DQJ38 Pages
-
ALPETY16 Pages
-
CTT23 Pages
-
STV8 Pages
-
KWB19 Pages
-
GREENKIT20 Pages
-
FKU31 Pages
-
FKF29 Pages
-
SGA5 Pages
-
DBB27 Pages
-
TVO8 Pages
-
AL23 Pages
-
SVA-FF15 Pages
-
RF7 Pages
-
NBS34 Pages
-
MKAR_MKAQ13 Pages
-
KGF11 Pages
-
KF4 Pages
-
JK16 Pages
-
HK16 Pages
-
FLARE13 Pages
-
FLAQ11 Pages
-
FKW28 Pages
-
FG14 Pages
-
ERK-MB38 Pages
-
DISA-H34 Pages
-
DISA-B32 Pages
-
DISA-60141 Pages
-
DISA-36032 Pages
-
DISA-30051 Pages
-
CNVA32 Pages
-
CNV29 Pages
-
BSK-RPR60 Pages
-
BKP-EN40 Pages
-
BKA-UE35 Pages
-
BAK-25017 Pages
-
BAK-24016 Pages
-
Aquaris-Silent38 Pages
-
Aquaris_KWB20 Pages
-
DISA-W43 Pages
-
PILB/PILBR33 Pages
-
DAV19 Pages
-
4DE18 Pages
-
4DF13 Pages
-
DQC16 Pages
-
DQDL16 Pages
-
IDA21 Pages
-
IKA23 Pages
-
ZMD17 Pages
-
DQF15 Pages
-
DQJF12 Pages
-
DQJA/DQJR10 Pages
-
DQJSL17 Pages
-
DQJSLC17 Pages
-
DHV18 Pages
-
DSARR7 Pages
-
QA30 Pages
-
PUSH23 Pages
-
WQA12 Pages
-
DSX-XXL23 Pages
-
AUDIX®-ÜSG13 Pages
-
SIA7 Pages
-
SAR/SAQ/SARP13 Pages
-
WDA32 Pages
-
KGRR17 Pages
-
DBBRR11 Pages
-
WGARR7 Pages
-
WGA29 Pages
-
DKAPPs6 Pages
-
EBE/EBP52 Pages
-
VRAPPs20 Pages
-
VRAR52 Pages
-
MAK15 Pages
-
DISA-Family4 Pages
-
RMS11 Pages
-
EasyBus24 Pages
-
TSR5 Pages
-
RS-F7 Pages
-
RS15 Pages
-
VLV31 Pages
-
VARS26 Pages
-
VAQS19 Pages
-
VAS26 Pages
-
PIANO27 Pages
-
MBM10 Pages
-
MBE/MBP27 Pages
-
DKG6 Pages
-
ALAS-P5 Pages
-
ALAS-F 1256 Pages
-
ALAS10 Pages
-
ALA-SO4 Pages
-
ALA-R4 Pages
-
ALA4 Pages
-
LL7 Pages
-
RR-Complete41 Pages
-
DBBR6 Pages
-
PA32 Pages
-
LK12 Pages
-
IB-R15 Pages
-
IB-Q21 Pages
-
KG19 Pages
-
BSG19 Pages
-
DSX-XXL-W25 Pages
-
DSX25 Pages
-
MINODSX6 Pages
-
MINODSA6 Pages
-
DSA15 Pages
-
COMBIPIL11 Pages
-
COMBIDQJ11 Pages
-
MINOPAB6 Pages
-
BDA11 Pages
-
SPB10 Pages
-
CULTRA-Studioline24 Pages
-
DISA-H34 Pages
-
DISA-60141 Pages
-
DISA-36032 Pages
-
DISA-30051 Pages
-
DISA-B32 Pages
-
AQUARIS SILENT38 Pages
-
NBS24 Pages
-
CNV29 Pages
-
CNVA32 Pages
-
JK-LP/JK-LU15 Pages
-
HKP / HKU16 Pages
-
FKW16 Pages
-
FLARE13 Pages
-
RF7 Pages
-
KGF9 Pages
-
SVA-FF8 Pages
-
BKA-Ü35 Pages
-
BSK-RPR60 Pages
-
BKP-EN40 Pages
-
BAK-2406 Pages
-
BAK-25014 Pages
-
KF4 Pages