4 Flue and Appliance Preparation

4.12 Flue Assembly - Installation

If the boiler is not to be fitted for some time cover the hole in the wall.On limited access installations push the flue assembly into thehole such that it is within the wall and does not stick out into the room, see diagram 4.12. Do not push the flue assembly too far into the hole as it has to be pulled back into the boiler and secured.

4.13 Internal Access Flue

If access to the outside wall is not practical, the flue system can be installed from inside. Use of the optional wall liner kit is required. GASKET(PRE-ATTACHED) Diagram 4.12 FOAMSEAL FOAMSEAL WALL THICKNESS-OVER 300mm FOAMSEAL
6930 WITH WALL LINER KIT ONLY SIDE FITTING
6832 4082 Q REAR FITTING Diagram 4.13 10mmWALL THICKNESS-UP TO 300mm "A"
6931 FOAMSEAL Q-25mm
Q Diagram 4.11 Diagram 4.14
17 221656D