REPLACEMENT OF PARTS

Note: No heat sink compound is required. The po-larity of the connections is not important. •Unclip thermistor from pipe.•Pull off electrical cennections from thermistor. •Fit replacement thermistor in reverse order to re- moval. To replace overheat thermostat •Locate the overheat thermostat on the right hand side of the heat exchanger. •Pull off the electrical connections from the ther- mostat. •Unscrew and remove two screws holding ther- mostat to heat exchanger. •Fit replacement thermostat in reverse order to removal, using heat sink compound on the con- tact surface of thermostat. •Refit electrical leads, the polarity is not impor- tant. 24