video corpo

Sattler Broschure 2018
1Pages

{{requestButtons}}

Catalog excerpts

Sattler Broschure 2018 - 1

Product properties of awning fabrics Perfection with boundaries Blind cloths are high performance pro- which may occur in spite of highly so- ducts. However, given the present state phisticated production and processing techniques. Such effects do no alter ments of environmental protection, they the value and usability of the product in can only be produced to a limited de- any way. In order to avoid irritation and gree of perfection. Therefore, the pro- in the context of consumer information, ducer can be confronted with customer we should like to draw your attention to complaints regarding certain effects these properties. Crease Marks Crease marks originate during the making-up and folding of the awning. These may result in the crease appearing as a dark streak when the light source is behind the cover, especially where light-coloured materials are concerned. Waviness around seams and on panels Waviness may occur along the side hems, around the seams and in the centre of the panels. The material is arranged in a double layer at the seams, resulting in unequal diameters when wound on the roller. The tension caused by the awning arms and sagging of the roller shaft and/or the front bar may increase these effects. Waviness may also occur if large amounts of water are allowed to gather on the awning during periods of heavy rainfall. Side panel elongation The awning is usually kept tensioned almost permanently with the help of an active spring system. Seams and hems act as a reinforcement but are also subject to the highest levels of stress. If the awning is rolled in, the seams and hems come to lie on top of each other, thus further increasing both pressure and tension. Seams and hems are pressed flat and therefore increase in length. This may cause the side hems to sag slightly when extending the awning. rain resistance Please note that standard acrylic awnings are not designed to protect from rain. Our water repellent TEXgard EASY CLEAN finish helps repell short and light rain. But long and heavy rain may cause water to penetrate the fabric. Always follow the care instructions: Never clean with high-pressure cleaners. Remove loose dirt regularly. Never roll up or fold whilst wet. Clean with a mild soapy water solution. The examples shown are based on the guidelines of the ITRS (German Association for technical textiles, roll-shutters and sun protection) and only represent an excerpt of them. Important consumer information

Open the catalog to page 1

All Sattler AG catalogs and technical brochures

  1. Nautex PVC

    2 Pages

  2. Nautex Acryl

    2 Pages

  3. Twilight

    2 Pages

Archived catalogs