The Futura fan coil combines innovative design with the traditional reliability and low noise of Sabiana products. The rounded shapeof the cover commercial cabinet and the white and light grey colours allow integration into all types of environments.Available with centrifugal or tangential design fans, installed in view,concealed or residential versions, the units can be controlled by numerous types of wired controllers or infrared home remote controls.As well as strict internal checks during the production processes,the main energy performance ratings are Eurovent certified. A complete series of accessories, including the innovative Crystall electronic filter, resolves all system requirements.The FSC series with centrifugal fans comes in 5 versions, 7 sizes, 14 models with single and double coil, with air flow-rates ranging from 200 to 1400 m
3 /h, heat outputs from 3 to 17 kW and cooling capacities from 1 to 7.5 kW.

Main components:

• O
UTER CASING Made from strong synthetic lateral corners and from galvanized and prepainted frontal steel sheet. The plastic top grid has fixed louvres and is reversible in order to distribute the air in two different directions. Standard colours: - lateral corners and top grid: Pantone 427C (light grey) - frontal sheet: RAL 9003 (white) - other colours on request. • I
NNER CASING Made from galvanized steel with closed cell modern insulation. • F
ILTER The filtration medium is a washable synthetic fibre, efficiency of 73% and the filter frame is made of galvanized steel. Special plastic sliding guides allow for easy insertion and removal of the filter. • F
AN ASSEMBLY The fans have aluminium blades directly keyed on the motor with double aspiration and they are dinamically and statically balanced during manufacture in order to have an extremely quiet operation. • E
LECTRIC MOTOR The motor is wired for single-phase and has four speeds, three of which are connected. The motor is fitted on sealed for life bearings and is secured on antivibration and self-lubricating mountings. Protection IP 21, class B. • H
EAT EXCHANGER It is manufactured from drawn copper tube and the aluminium fins are mechanically bonded onto the tube by an expansion process. The coil has two 1/2 inch BSP internal connections and 1/8 inch BSP air vent and drain. Flow and return pipe connections are situated at the same end on the left side looking at the unit. On request we can deliver the unit with the connections on the right end side. This operation can also be easily carried out on site during installation. • C
ONDENSATE COLLECTION TRAY Made from plastic with an “L” shape fitted on the inner casing. The outside diameter of the condensate discharge pipe is 15mm.