RonaDeck Eco Tree Pit
4Pages

{{requestButtons}}

Catalog excerpts

RonaDeck Eco Tree Pit - 1

Resin bound porous tree pit system ■ SuDS compliant—highly permeable ■ UV stable—non yellowing resin ■ natural aggregate appearance ■ alternative to tree grilles ■ recycled aggregates available ■ installed by approved contractors ■ design can accommodate some tree growth ■ attractive; complements the surrounding area ■ design accommodates tree growth RonaDeck Eco Tree Pit is a resin bound natural aggregate finish surround for planted trees in public and private areas. Surrounding the tree in a solid yet semi- flexible construction allows the tree to grow, prevents a build up of litter and removes a storage or hiding place for hazardous items such as syringes and needles. Dogs are also less likely to foul in such areas. The RonaDeck Eco Tree Pit comprises a two component polyurethane resin and a range of selected rounded attractive aggregates. The design of this resin bound aggregate system provides a surface which is attractive, highly porous and able to receive light foot traffic. Its porosity allows water to flow through a 6-1 Omm aggregate system at the rate of >850 litres/m2/minute. The flow rate may be reduced when using a smaller or more angular aggregate. Physical Properties Minimum depth Traffic after RonaDeck Eco Tree Pit Resin 1.5kg RonaDeck Eco Tree Pit Aggregate 25kg RonaDeck Eco Tree Pit Resin RonaDeck Eco Tree Pit Aggregate Resin Bound and Bonded Surfacing Continued on following page... anges—Concrete Repair and Coatings, Screeds, Waterproofing and Tanking, and, Flooring and Bedding

Open the catalog to page 1
RonaDeck Eco Tree Pit - 2

RonaDeck Eco Tree Pit Resin bound porous tree pit system UV Stable Resin RonaDeck Eco Tree Pit resin is UV resistant and will not yellow on exposure to UV light. This is a more attractive option than other types of resin which can yellow, dramatically altering the appearance of the finished surface. Application Conditions The working time and pot life of the resin is affected by material, ambient and substrate temperature. At low temperatures pot life is longer, the material will take longer to cure and the time at which it can be trafficked will be delayed. At higher temperatures pot life,...

Open the catalog to page 2
RonaDeck Eco Tree Pit - 3

RonaDeck Eco Tree Pit Resin bound porous tree pit system Instructions for Use (continued) compact, level and smooth with a steel float. Avoid excessive compaction as this will reduce porosity. 11. Leave sufficient space around the trunk to allow for movement and growth. 12. To provide a more slip-resistant and matt appearance finish, immediately cast RonaDeck TP Fine Aggregate into the top surface of the wet resin and aggregate at approximately 0.1kg/m 2. Scatter evenly to avoid a patchy appearance. 13. Allow to cure. Protect from heavy rain for 1 - 2 hours at 20oC and open to traffic as...

Open the catalog to page 3
RonaDeck Eco Tree Pit - 4

RonaDeck Eco Tree Pit Resin bound porous tree pit system Aggregates The information detailed in this leaflet is liable to modification from time to time in the light of experience and of normal product application, and before using, customers are advised to check with Ronacrete Ltd, quoting the reference number, that they possess the latest issue. Any person or company using the product without first making further enquiries as to the suitability of the product for the intended use does so at his own risk, and Ronacrete Ltd can accept no responsibility for the performance of the product, or...

Open the catalog to page 4

All Ronacrete Limited catalogs and technical brochures

  1. RonaBond MCI

    3 Pages