RonaBond Flowable Micro Concrete
5Pages

{{requestButtons}}

Catalog excerpts

RonaBond Flowable Micro Concrete - 1

RonaBond Flowable Micro Concrete Prepacked mortars for hand applied flowable concrete Pre-packed flowable micro concrete high strength flowable micro concrete free flows in to shuttering and formwork shrinkage compensated can be trowelled, poured or pumped protects steel reinforcement RonaBond Flowable Micro Concrete is a repair concrete used in place of hand applied mortars to repair and replace sections of concrete. Designed for pour and pump application the material is poured in to shuttering to reform concrete profiles. It is shrinkage compensated and provides high early and ultimate strengths. Flow is affected by temperature. Test Data Compressive Strength @ 20°C (Flowable) Compressive Strength @ 20°C (Fluid) Compressive Strength @ 5°C (Flowable) Tensile Strength Concrete Repair and Coatings Continued on following page... Other Ranges—Resin Bound and Bonded Surfacing, Screeds, Flooring and Bedding, and Waterproofing and Tanking

Open the catalog to page 1
RonaBond Flowable Micro Concrete - 2

RonaBond Flowable Micro Concrete Prepacked mortars for hand applied flowable concrete Test Data (continued) Bond Strength 3 days 7 days 28 days Note that all quoted data is based on laboratory tests conducted at 20oC. Cubes, tested at 28 days, are 100mm and air cured. Results shown are MAXIMUM laboratory strengths achieved by casting and curing cubes in ideal working conditions; site strengths will be lower. Mixing Instructions RonaBond Flowable Micro Concrete will provide optimum performance when machine mixed in a forced action mixer (eg. Creteangle pan mixer or slow speed [500 rpm] drill...

Open the catalog to page 2
RonaBond Flowable Micro Concrete - 3

RonaBond Flowable Micro Concrete Prepacked mortars for hand applied flowable concrete Instructions for Use (continued) 11. compressed air. Mix RonaBond Flowable Micro Concrete (see Mixing RonaBond Flowable Micro Concrete). Pour the concrete as soon as possible, and no more than 20 minutes after mixing (at 20oC). Pours should be continuous and material waiting to be poured should be kept agitated. Start the concrete pour from one side or end of the works to avoid trapping air. The fluid concrete is self compacting, vibration is unnecessary and should not be used, however shutters can be...

Open the catalog to page 3
RonaBond Flowable Micro Concrete - 4

RonaBond Flowable Micro Concrete Prepacked mortars for hand applied flowable concrete Shelf Life and Storage RonaBond materials should be stored unopened between 5°C and 25°C in dry warehouse conditions and out of direct sunlight. In these conditions shelf life is approximately 9 months. Site Attendance When on site Ronacrete representatives are able, if asked, to give a general indication of the correct method of installing a Ronacrete product. It is important to bear in mind that Ronacrete Ltd is a manufacturer and not an application contractor and it is therefore the responsibility of...

Open the catalog to page 4
RonaBond Flowable Micro Concrete - 5

RonaBond Flowable Micro Concrete Prepacked mortars for hand applied flowable concrete Flex Meadow, Harlow Concrete Repair Product: RonaBond Flowable Micro Concrete Bond Strength Test: > 1.5 MPa Carbonation Resistance: dk < control concrete (MC (0.45)) Dangerous Substances: Refer to Safety Data Sheet The information detailed in this leaflet is liable to modification from time to time in the light of experience and of normal product application, and before using, customers are advised to check with Ronacrete Ltd, quoting the reference number, that they possess the latest issue. Any person or...

Open the catalog to page 5

All Ronacrete Limited catalogs and technical brochures

  1. RonaBond MCI

    3 Pages