| RADIANT LED LINEAR SYSTEM modular led strip light The Radiant LED Linear System is designed for use in a variety of architectural and retail applications including indirect, cove and cabinet-lighting. The aluminium die cast modules house a constant current driver circuit with either 2 or 4 LEDs and a total power rating of up to 8 Watts per module depending on LED type. It combines the long-life advantages of LED's with the ability to fit any space providing the effect of a bespoke installation whilst offering the convenience and cost of an 'off-the-shelf' system. The modules are attached to a 4 conductor, extruded aluminium power rail that provides both power and data channels, for dimming and colour change control, in addition to providing additional heat sinking for the LED system. Each section of the linear system can be joined together with an inline connector that is itself illuminated with matching LEDs in order that the system can provide continuous lighting without gaps up to a maximum length of 120 ft, depending on the power of the particular LEDs used. The power rail can be bent to provide continuous LED lighting that follows building profiles and architectural details. modules radled101-4wm-mn 4led 1.2 watt warm white med building beam nichia radled101-2wm-mn 2led 1.2 watt warm white med beam nichia radled101-4cw-mn 4led 1.2 watt cool white med beam nichia radled101-2cw-mn 2led 1.2 watt cool white med beam nichia radled101-4wm-wl 4led 1.2 watt warm white wide beam nichia radled101-2wm-wn 2led 1.2 watt warm white wide beam nichia radled101-4cw-wn 4led 1.2 watt cool white wide beam nichia radled101-2cw-wn 2led 1.2 watt cool white wide beam nichia |