| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Double Driving For plastered and solid wall | | |
| | | |
| | | The framing system is made up of two side boxes with double hinge projected for the sliding of four parallel doors | | |
| | | |
| | | Features It is the ideal solution to divide a single space in two , or enable you to obtain a bigger space of your choice. This system is the ideal solution.By using two identical systems realized with reduced measurements it enables the sliding of up to four parallel doors with an unbelievable results A special kit of driving (on request) enables the driving of the two doors by opening/closing | | |
| | | |
| | | Structure Two disappering front systems enable the 'driving' of up to four lateral doors.Two both sides,with parallel sliding and central clousure. The development of the space in a few centimetres... | | |
| | | |
| | | Sized | | |
| | | |
| | | Width | | Height | | Thickness for solid wall | | |
| | | | |
| | | |
| | | | | | | | | | Doorway | Max overall dimension | | | | 1200 (300x4) | 1900 | | | | 1400 (350x4) | 2200 | | | | 1600 (400x4) | 2500 | | | | 1800 (450x4) | 2800 | | | | 2000 (500x4) | 3100 | | | | 2200 (550x4) | 3400 | | | | 2400 (600x4) | 3700 | | | | | | | | | | | | | | | | | | | | Doorway | Max overall dimension | | | | 2000 | 2100 | | | | 2050 | 2150 | | | | 2100 | 2200 | | | | 2150 | 2250 | | | | 2200 | 2300 | | | | 2250 | 2350 | | | | 2300 | 2400 | | | | 2350 | 2450 | | | | 2400 | 2500 | | | | 2450 | 2550 | | | | | | | | | | | | | | | | Structure from | Finished wall | | | | 114 | 150 | | | | 138 | 174 | | | | 164 | 200 | | | | | | | | | | | | | |
| | | |
| | | Structure from Finished wall Structure from Plaster wall structure Finished wall 114 > 132 150 138 > 156 174 164 > 182 200 | |
| | | |
| | | |
| | | 2500 2600 | | |
| | | |
| | | |
| | | Oversize If required, special system can be produced with the width starting from 300 mm up to 1500 mm, and the height from 1000 to 270 The width is calculated in 50 mm increments | | |
| | | Note The use door panels of thickness max 43mm is advised -including possible profiles to keep the glass panel in place. The screws supplied have to be used to fit the plaster board to the system (otherwise screws lengh inferior to 19 mm is suitable for plaster board of thickness 12.5 mm) ;the drilled have to be made in correspondence to the reinforcing boards. On request it is avaible the kit 'driving' that enables the closure and opening of both doors Standard payload:120kg It is suitable for the installation of any standard panel for the sliding doors | | |
| | | |
| | | Accessories on request Sliding and traditional doors (see photo) Door post in untreated or lacquered Handles in brass ,glossy and mat steel Kit of driving Special screw D 3,5 x L 19 (See the accessory catalogue) | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |