| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Driving For solid and | | |
| | | plastered wall | | |
| | | |
| | | |
| | | The framing system is made up of one lateral box with double hinge projected for the slid ing of two parallel doors with closure on the same side | | |
| | | |
| | | Features Have you got limited space?But would you like to have a traditional doorwayJt easy..Using the driving system in a limited space you will install a reduce system but you will obtain a normal size doorway!'driving is the system that hides two sliding doors disappering in the wall with closing/opening on the same side,right or left Also avaible is the "driving" kit | | |
| | | |
| | | Structure It is a system with reduced measurements that through the simultaneous sliding of two disappering sliding doors opening/closing on the same side offers the same doorway as traditional door.A special kit of driving(on request)enables the 'driving'of the opening on the same side | | |
| | | |
| | | | | | | | | | Sized | | | | | Width | | | | | Doorway Max overall dimension | | | | 600 ( 300+ 300) | 1000 | | | | 700 ( 350+ 350) | 1150 | | | | 800 ( 400+ 400) | 1300 | | | | 900 ( 450+ 450) | 1450 | | | | 1000 ( 500+ 500) | 1600 | | | | 1100 ( 550+ 550) | 1750 | | | | 1200 ( 600+ 600) | 1900 | | | | 1400 ( 700+ 700) | 2200 | | | | 1600 ( 800+ 800) | 2500 | | | | 1800 ( 900+ 900) | 2800 | | | | 2000 (1000+1000) | 3100 | | | | 2200 (1100+1100) | 3400 | | | | 2400 (1200+1200) | 3700 | | | | | | | | | |
| | | Height | | Thickness for solid wall | | |
| | | |
| | | |
| | | | | | | | | | Doorway | Max overall dimension | | | | 2000 | 2100 | | | | 2050 | 2150 | | | | 2100 | 2200 | | | | 2150 | 2250 | | | | 2200 | 2300 | | | | 2250 | 2350 | | | | 2300 | 2400 | | | | 2350 | 2450 | | | | 2400 | 2500 | | | | 2450 | 2550 | | | | 2500 | 2600 | | | | | | | | | | | | | | | | | | | | Structure from | Finished wall | | | | 114 | 150 | | | | 138 | 174 | | | | 164 | 200 | | | | | | | | | | | | | |
| | | |
| | | Thickness for plaster wall | | |
| | | |
| | | Structure from Plaster wall structure Finished wall 114 > 132 150 138 > 156 174 164 > 182 200 | | |
| | | |
| | | |
| | | Oversize If required, special system can be produced with the width starting from 300 mm up to 1500 mm, and the height from 1000 to 270 The width is calculated in 50 mm increments | | |
| | | Note The use door panels of thickness max 43mm is advised -including possible covering profiles to keep the glass panel in place The screws supplied have to be used to fit the plaster board to the system ( otherwise screws lengh inferior to 19 mm is suitable for plaster board of thickness 12.5 mm) ;the drilled have to be made in correspondence to the reinforcing boards. On request it is avaible the kit 'driving' that enables the closure and opening of both doors Standard payload:120kg It is suitable for the installation of any standard panel for the sliding doors | | |
| | | |
| | | Accessories on request Sliding and traditional doors (see photo) Door post in untreated or lacquered Handles in brass ,glossy and mat steel Kit of driving Special screw D 3,5 x L 19 (See the accessory catalogue) | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |