• Products
  • Catalogues
  • Projects
  • News & Trends
  • Exhibitions

Spacetherm WRB - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

THERMAL SOLUTIONS OVERVIEW Spacetherm® WRB (window reveal board) is a high performance laminate specifically designed to be fixed or glued to the existing solid wall at the window reveals. Spacetherm® WRB consists of Spacetherm® aerogel insulation blanket bonded to plasterboard or fermacell with or without plywood reinforcement. For use in applications where low U-values are required with limited space. Ultra thin insulation system for window reveals. The best thermal performance available. Minimum loss of space around openings. Glued or direct fixed to solid walls. Constant long term thermal performance 50 years+. Includes an integrated vapour control layer. Non-hazardous material. Can be used in partnership with traditional dry-lining. Image showing Spacetherm® WRB applied internally to a reveal on an existing external wall structure. INSTALLATION Spacetherm® WRB should be glued to the existing wall structure. Drilling is not recommended although it may be required for wiring and services. If drilling is required then care should be taken to compress the panel as much as possible to reduce the risk of insulation fibres wrapping around the drill bit. CUTTING Spacetherm® WRB laminate may be cut using a jigsaw or circular saw. When using hand tools care should be taken that the fibrous insulation layers are not damaged. Image showing Spacetherm® WRB components, plasterboard bonded to Aerogel insulation. It should be noted that Spacetherm® WRB can be supplied to match Spacetherm® P, PP, F & FP panels. INTERNAL & EXTERNAL REVEAL ANGLES Spacetherm® WRB panels should be cut in such a way as to allow for the jointing of the plasterboard or fermacell and an unbroken run of insulation to the existing wall in both internal and external angles. Refer to Installation Guide for details. www.proctorgroup.com The Haugh, Blairgowrie, Perthshire, PH10 7ER Tel: 01250 872 261 Fax: 01250 872 727 email: contact@proctorgroup.com

 Open the catalogue to page 1

THERMAL SOLUTIONS TAPING & FILLING JOINTS Prior to decoration Spacetherm® WRB panels should be thoroughly wiped clean, and then taped and filled. A skim coat may be applied depending on the type of surface finish. Physical Properties Thickness Plywood Vapour Control Layer Spacetherm® WRB is available in a variety of board types to suit the Spacetherm® P, PP, F & FP range and standard drylining finishes. Thickness Fermacell Thickness Aeorgel Thickness Plasterboard Spacetherm PP and in particular the dust produced when handling and cutting the material may cause drying of the skin and therefore...

 Open the catalogue to page 2

All A. PROCTOR GROUP catalogues and technical brochures

  1. APG Product Guide

    20 Pages

    En
  2. Wraptite Brochure

    12 Pages

    En
  3. Frameshield 100

    1 Pages

    En
  4. Spacetherm C

    2 Pages

    En
  5. Spacetherm CBS

    2 Pages

    En
  6. Spacetherm F

    2 Pages

    En
  7. Spacetherm FP

    2 Pages

    En
  8. Spacetherm P

    2 Pages

    En
  9. Spacetherm PP

    2 Pages

    En
  10. Protech GM+

    2 Pages

    En
  11. Protech GM Super

    2 Pages

    En
  12. Protech GM HM

    2 Pages

    En
  13. Protech GM PP

    2 Pages

    En
  14. Provoid

    2 Pages

    En
  15. Protech GM Plus

    2 Pages

    En
  16. APG product guide

    20 Pages

    En
  17. Timber frame

    12 Pages

    En
  18. Product guide

    16 Pages

    En
  19. ACOUSTIC SYSTEMS

    12 Pages

    En