video corpo

TG63-100
4Pages

{{requestButtons}}

Catalog excerpts

TG63-100 - 1

GEOTECHNICAL EQUIPMENT Static and/or dynamic tests in one equipment. VAGM GEOTECHNICAL EQUIPMENT Pagani Geotechnical Equipment Localita Campogrande - 29010 Calendasco (Pc) - Tel +39 0523/771535 Fax +39 0523/773449 - Italia - e-mail: info@pagani-geotechnical.com

Open the catalog to page 1
TG63-100 - 2

Static and/or dynamic tests in one equipment. The penetrometer TG63-100 can be configured by request for dynamic penetrometric tests, static penetrometric tests, or both. As for dynamic tests, depending on the soils mainly examined, the penetrometer can be equipped with different beating systems (Super heavy DPSH, Heavy – DPH or Medium – DPM). It allows also to take adjusted or limited trouble samples which enable a better interpretation of the measurements. The TG63 stand out for its very high power efficiency (78%). Verticality is guaranteed during penetration of the rods and of any...

Open the catalog to page 2
TG63-100 - 3

Max pull-down force (kN) - (kilopound) 100-10197 Max pull-up force (kN) - (kilopound) 120-12236 Test speed (cm/sec) - (fool/sec) 2 - 0.065 Selector for CPT tests with load cell and manual data acquisition electronic card Max pull-down force measured by the load cell (kN) - (kilo-pound) 100 - 10197 Max penetration speed (cm/sec) - (foot/sec) Max extraction speed (cm/sec) - (foot/sec) Lifting and thrust unit piston stroke (mm) - (inch) Stabilizers 3 hydraulic operation stabilizers with articulated foot DP tests The following tests can be carried out: Anchoring system Anchoring...

Open the catalog to page 3
TG63-100 - 4

Pagani Geotechnical Equipment Localita Campogrande - 29010 Calendasco (Pc) - Tel +39 0523/771535 Fax +39 0523/773449 - Italia - e-mail: info@pagani-geotechnical.com Non-binding data, subject to modifications. Pictures may differ from the standard version. Equipment may be different depending on the country of destination. Printed in Italy.

Open the catalog to page 4

All Pagani catalogs and technical brochures

  1. DPM30

    6 Pages

  2. TG63-150

    10 Pages

  3. TG63-100

    10 Pages

  4. TG 73-200

    10 Pages

  5. TGAS-08

    4 Pages

  6. PIEZOCONE mk

    4 Pages

  7. TG63-150

    4 Pages

  8. TG 30-20

    4 Pages

  9. DPM30

    3 Pages