Tite-Loc Panel
1Pages

{{requestButtons}}

Catalog excerpts

Tite-Loc Panel - 1

TITE-LOC PANEL TITE-LOC SMOOTH PANEL MATERIALS .032 aluminum* .040 aluminum* 24 gauge steel* 22 gauge steel* SMOOTH PANEL (STANDARD) SMOOTH PANEL WITH STRIATIONS (OPTIONAL) (STANDARD) WITH STRIATIONS STRIATIONS W/ PENCIL RIBS (OPTIONAL) (OPTIONAL) `` Galvalume Plus available 2" striations are only available by request `` Maximum factory-produced panel length is 64’ (check w/factory for longer lengths) (OPTIONAL) `` 38 stocked colors (24 gauge steel) 12", 16" or 18" O.C. `` 15 stocked colors (22 gauge steel) STRIATIONS W/ PENCIL RIBS PENCIL RIBS (OPTIONAL) 2" (OPTIONAL) CLASSIFICATION `` 30-year non-prorated finish warranty 12", 16" or 18" O.C. `` Weathertightness warranty available PENCIL RIBS `` Herr-Voss corrective leveled `` UL-790 Class A fire rated `` UL-263 fire resistance rated `` PENCIL RIBS UL-2218 impact(OPTIONAL - LIMITED AVAILABILITY) resistance rated TESTS (TITE-LOC PLUS ONLY) 12", 16" or 18" O.C. `` 24 Gauge Steel SSTD Missile Impact Tested - Passed STRIATIONS W/ PENCIL RIBS WITH STRIATIONS SMOOTH PANEL (OPTIONAL) (OPTIONAL) 2" 2" GEORGIA FACILITY ONLY STRIATIONS W/ PENCIL WITH STRIATIONS RIBS PENCIL RIBS (OPTIONAL) (OPTIONAL) 2" 2" (OPTIONAL) `` .032 Aluminum SSTD Missile Impact Tested - Passed STRIATIONS W/ PENCIL R PENCIL RIBS (OPTIONAL) 2" (OPTIONAL - LIMITED AVAILABILITY) `` ASTM E331/1646 tested `` ASTM E283/1680 tested `` ASTM E2140 (Tite-Loc Plus only) 2" FLORIDA BUILDING & MIAMI-DADE PRODUCT APPROVALS Please refer to pac-clad.com or your local factory for specific product approval numbers for Tite-Loc Plus. `` 36 stocked colors (.032 aluminum) *24 gauge and 22 gauge steel and .032 and .040 aluminum panels are UL-90 classified over solid substrate. See roof deck construction in Underwriter Laboratories roofing materials and systems directory. **24 gauge and 22 gauge Tite-Loc Plus panels are FM Approved in 12” and 16” widths over 16 gauge open purlins only. Not all panel conditions are available in each Petersen Aluminum branch; additional freight charges might apply if specific panel condition is required. Tite-Loc and Tite-Loc Plus panels are supplied as “smooth” as standard. Customer must advise if additional panel conditions are required. `` 20 stocked colors (.040 aluminum) STRIATIONS W/ PENCIL RIBS Pencil ribs (OPTIONAL) beads) and (stiffening SMOOTH PANEL WITH STRIATIONS (OPTIONAL) (STANDARD) TITE-LOC PLUS WITH STRIATIONS (OPTIONAL) TITE-LOC PLUS TITE-LOC SMOOTH PANEL (STANDARD)

Open the catalog to page 1

All PAC-CLAD Petersen Aluminum catalogs and technical brochures

  1. Modular AL

    1 Pages

  2. colorgard™

    1 Pages

  3. REDI-ROOF

    1 Pages

  4. Snap-on

    1 Pages

  5. Tite-loc

    1 Pages

  6. SNAP-CLAD

    1 Pages

Archived catalogs