Organoid Acoustic Surfaces
6Pages

{{requestButtons}}

Catalog excerpts

Organoid Acoustic Surfaces - 2

ORGANOID® ACOUSTICS ORGANOID® ACOUSTICS »Pure authenticity - functionality included« Organoid® absorbers are coated in special production procedure and are finished acoustically to completely designed acoustic modules with exactly defined efficiencies. These optimized efficiencies considerably reduce the required absorption surfaces in a room. Because of the uninterrupted organoid® surfaces (with a natural scent while maintaining the absorbing properties) there are no limits for the optical design and the shaping. With picture absorbers, the natural surfaces are folded around corners...

Open the catalog to page 2
Organoid Acoustic Surfaces - 3

N AT U R A L C O AT I N G S »Organoid® natural coatings distinguish themselves by their naturalness and authenticity and enable a new experience of natural raw materials with all senses. We use exclusively natural and authentic raw materials not used in conventional production processes. In our factory in Tirol - the heart of the Alps - we pay attention to ecological and sustainable production. This begins with supplying the operation with 100 % green power and ends with our binding agents free of biocides, plasticizers, and solvents. Only in this way we do reach the unique appearance with...

Open the catalog to page 3
Organoid Acoustic Surfaces - 4

SLOT ABSORBER Our Organoid® slot absorbers are designed as sound absorbers according to the Helmholtz principle. Depending on the perforation and the slotting of the carrier material, nearly any acoustical effectiveness can be realized with corresponding damping. According to EN ISO 354, depending on the distance from the wall and the selected acoustic treatment, Organoid® slot absorbers reach the sound absorber class A. With the tongue-and-groove connection system, the panels can be installed continuously and without visible horizontal joints. A B S O R B E R PA N E L The absorber...

Open the catalog to page 4
Organoid Acoustic Surfaces - 5

*slightly fragant WILDSPITZE MARGERITTA* WILDSPITZE ROASA* ALPINE HAY FROM 1,700 M ABOVE SEA LEVEL AT THE FOOT OF THE WILDSPITZE – WITH GENUINE DAISY FLOWER HEADS ALPINE HAY FROM 1,700 M ABOVE SEA LEVEL AT THE FOOT OF THE WILDSPITZE – WITH ROSE PETALS AND BUDS WILDSPITZE LAWENDL* WILDSPITZE WANILLLÄ* ALPINE HAY FROM 1,700 M ABOVE SEA LEVEL AT THE FOOT OF THE WILDSPITZE – WITH LAVENDER STALKS AND BLOSSOMS ALPINE HAY FROM 1,700 M ABOVE SEA LEVEL AT THE FOOT OF THE WILDSPITZE – WITH BOURBON VANILL

Open the catalog to page 5
Organoid Acoustic Surfaces - 6

ORGANOID TECHNOLOGIES GMBH NESSELGARTEN 422 6500 FLIESS / AUSTRIA TEL / FAX + 43 (0) 5449 200 01 EMAIL ACOUSTIC@ORGANOIDS.AT WEB WWW.ORGANOIDS.AT VAT. REG. NO ATU 67 253 688 TAX ID 109 / 1267 FN 378195W LG INNSBRUCK PRODUCED CLIMATE-NEUTRAL IN COOPERATION WITH CLIMATEPARTNER

Open the catalog to page 6

All Organoid Technologies GmbH catalogs and technical brochures