video corpo

Suction-sweeper_CityRanger2250
4Pages

{{requestButtons}}

Catalog excerpts

Suction-sweeper_CityRanger2250 - 1

Suction Sweeper The suction sweeper is one of the most indispensable attachments designed for the City Ranger 2250. The utility machine owes its all-year-round capability to this attachment. In spring the operator can clean grit and grime, left over from the winter, from streets and paths. In the autumn it takes care of the wind-blown leaves and dirt. In summer it keeps outdoor areas neat and tidy. The suction sweeper is effective everywhere – on paths and pavements, verges, driveways, outdoor and indoor parking areas, etc. The suction sweeper can reach almost any nook or cranny. The suction sweeper unit has two, three or four brushes, each with its own water sprayer, an external vacuum hose with nozzle, a water tank and a hopper for the collected rubbish. The attachment units are designed to work perfectly together – to create optimum overall effectiveness. Dust is done for with the suction sweeper. It is PM10 certified and has EU environmental approval. When you change attachments, the City Ranger 2250 hydraulic hoses are connected at the turn of a handle!

Open the catalog to page 1
Suction-sweeper_CityRanger2250 - 2

2, 3 or 4 brushes The suction sweeper is equipped with 2-4 brushes - the two front brushes are standard and the two side-brushes are optional extras. Each brush is equipped with a water sprayer to prevent dust spreading while the unit is working. The front brushes are height-adjustable via a nose wheel. A vacuum nozzle behind the brushes draws dirt and rubbish into a central vacuum hose under the machine. The polycast nozzle is exceptionally good at collecting discarded cans when the brushes draw them in. A cylindrical brush in the nozzle guides the rubbish up into the vacuum hose. The...

Open the catalog to page 2
Suction-sweeper_CityRanger2250 - 3

Easy fitting Fitting the suction sweeper is easy and quick. The attachment is backed in under the hopper, then driven forwards, so the front brushes attach to the A-frame. All the operator then has to do is lock two locking levers, one on the A-frame and one on the hopper. The hydraulics, power, water supply and vacuum hose connect automatically. It is impossible to make a mistake; the two locking levers will not lock if something is amiss. Hydraulic tipping, directly into container Minimal storage space needed

Open the catalog to page 3
Suction-sweeper_CityRanger2250 - 4

Dimensions Fitted with two side-brushes: Length 3,400 mm 2,100 mm Without the two side-brushes: Length Width Height Storage (fitted with two side-brushes): Length Width Height Storage (without the two side-brushes): Length Width Height Special features It's easy to check that you have water: there is a water meter on the side of the hopper and a water indicator in the cab. Integrated and well-protected hoses Nose wheel to adjust height of brushes The hopper and water tank are made of moulded plastic - rust free The suction sweeper is delivered with a frame for detaching and storing the...

Open the catalog to page 4

All NILFISK ADVANCE catalogs and technical brochures

  1. HOENLJ_mh-5m-e

    13 Pages

  2. AX14

    2 Pages

  3. MC-2C

    4 Pages

  4. MC-3C

    4 Pages

  5. MH 1C

    16 Pages

  6. MH 2C

    4 Pages

  7. SC400

    4 Pages

  8. SC351

    4 Pages

  9. CA 330

    2 Pages

  10. GD 5

    4 Pages

  11. GU 700A

    2 Pages

  12. GD 320

    2 Pages

  13. GD 5 Fly

    2 Pages

  14. VL500-75

    9 Pages

  15. GM 80P

    10 Pages