• Products
  • Catalogues
  • Projects
  • News & Trends
  • Exhibitions

ACCENTA - 22 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

Catalogue excerpts

Profiles ACCENTA® Secure joints for all corners and edges ACCENTA® System 9 Dessino Secure joints for all corners and edges ACCENTA® System 7 Classic Page 629-632 ACCENTA® System Fino Secure joints for all corners and edges ACCENTA® System 127 Secure joints for all corners and edges ACCENTA® System Piccolo 14 Secure joints for all corners and edges Secure joints for all corners and ed

 Open the catalogue to page 3

Secure joints for all corners and edges Often only inconspicuously placed parts provide the right finish for the kitchen. And wall joint profiles are exactly such parts. New materials in connection with modern manufacturing methods ensure the highest possible quality standards and perfectly fitting installation for all ACCENTA® profiles and strips. A profiling programme for kitchens which present themselves as functionally and visually monolithic. aluminium coloured stainless steel coloured

 Open the catalogue to page 4

System 9 Dessino ACCENTA® Secure joints for all corners and edges Page 626-627 Page 627 Page 627 Page 627 Wall joint profile End caps Internal corners External corners

 Open the catalogue to page 5

Item/ Description System 9 Dessino wall joint profile Installation instruction: 1. Cut base profile element to length at right angles as measured. 2. Cut main profile to the same length. Internal corner 135° Base and main profile 3. Plug the internal corner 90° onto the main profile and begin assembly in the corresponding corner. Plug-in the corner part before inserting the base profile. 4. Plug-in the corner caps. In this manner, assemble the successive segments – and measure as often as necessary.

 Open the catalogue to page 6

Item/ Description System 9 Dessino wall joint profile Standard length per profile 5.06 m. 40,4 mm H 40 mm, D 25 mm Only available in units of 25.30 m. 25, 2 stainless steel coloured System 9 Dessino end caps right Available only in PU of 10 pcs. stainless steel coloured System 9 Dessino end caps left Available only in PU of 10 pcs. stainless steel coloured System 9 Dessino inside corners 90° Available only in PU of 10 pcs. stainless steel coloured System 9 Dessino inside corners 135° Available only in PU of 10 pcs. stainless steel coloured System 9 Dessino outside corners 90° Available only in...

 Open the catalogue to page 7

A^^FKITA® Order no. Item/ /A v> v> EI N I System 9 Dessino Description

 Open the catalogue to page 8

System 7 Classic ACCENTA® Secure joints for all corners and edges Wall joint profile Page 630 End caps Page 631 Internal corners Page 631-632 External corners Page 632 Stainless steel protective plate Page 632

 Open the catalogue to page 9

Item/ Description System 7 Classic wall joint profile Installation instruction: 1. Cut base profile element to length at right angles as measured. 2. Cut main profile to the same length. Internal corner 135° Base and main profile 3. Plug the internal corner 90° onto the main profile and begin assembly in the corresponding corner. Plug-in the corner part before inserting the base profile. 4. Plug-in the corner caps. In this manner, assemble the successive segments – and measure as often as necessary. Internal corner 90° Dimensions in mm System 7 Classic wall joint profile H 33 mm, D 30 mm Standard...

 Open the catalogue to page 10

Item/ Description System 7 Classic end caps right Available only in PU of 25 pcs. grey to stainless steel coloured System 7 Classic end caps left Available only in PU of 25 pcs. grey to stainless steel coloured System 7 Classic internal corners 90° Available only in PU of 25 pcs. grey to stainless steel coloured

 Open the catalogue to page 11

Item/ Description System 7 Classic internal corners 135° Available only in PU of 10 pcs. grey to stainless steel coloured System 7 Classic external corners 90° Available only in PU of 10 pcs. grey to stainless steel coloured System 7 Classic stainless steel protective plate For gluing of WAP system 7 Classic. As heat protection behind a stove. 9012090

 Open the catalogue to page 12

System Fino ACCENTA® Wall joint profile Page 634 End caps Page 634 External corners Page 635 Internal corners Page 635 Stainless steel protective plate Page 635 Recess rear wall combi profile Page 636 End caps Page 637 Base profile Page 637 Rear wall profile Page 637 System sealing profile Page 638 Secure joints for all corners and edges

 Open the catalogue to page 13

System Fino Item/ Description System Fino wall joint profile The new wall joint profile Fino shows a slim line! If no recess back wall has to be installed, but clear lines and fresh design dominate, Fino is just the right range. It creates a perfect seal and simply looks good. Less is more: more workspace due to a profile with less depth. Installation is easy and follows the classic method: screw base profile to the worktop, clip in - finished! End cap right Cover profile External corner 90° Bottom profile End cap left System Fino wall joint profile 23,53 Standard length per profile 5 m. Only available...

 Open the catalogue to page 14

System Fino Item/ Description System Fino external corners 90° Available only in PU of 10 pcs. System Fino internal corners 90° Available only in PU of 25 pcs. System Fino internal corners 135° Available only in PU of 10 pcs. System Fino stainless steel protective plate For gluing of WAP system Fino. As heat protection behind a stove. 9015027

 Open the catalogue to page 15

System Fino Item/ Description System Fino Niche rear wall (NR) combi profile The new niche rear wall (NR) combi profile Fino solves three problems at once: 1. The transition from worktop to niche rear wall panel is reliably sealed by a thin, elegant profile. The sealing lip on the bottom edge of the base profile has been reduced to a minimum of the required width and is therefore particularly unobtrusive after installation. 2. The niche rear wall panel can be quickly and cleanly installed by simply clicking it into the upper profile. 3. The transition from the niche rear wall panel to the wall...

 Open the catalogue to page 16

System Fino Item/ Description System Fino NR end caps left small for bottom profile Available only in PU of 25 pcs. System Fino NR end caps right small for bottom profile Available only in PU of 25 pcs. System Fino NR end caps left for upper profile Available only in PU of 25 pcs. System Fino NR end caps right for upper profile Available only in PU of 25 pcs. System Fino base profile To permanently protect the base area against moisture and dirt, with a sealing strip made of plastic. For base with 16 mm wall thickness. Only available in units of 50 m. System Fino rear wall profile For recess walls...

 Open the catalogue to page 17

All Naber GmbH catalogues and technical brochures

  1. SELECTA

    116 Pages

    En
  2. LUMICA

    142 Pages

    En
  3. MONTEC

    40 Pages

    En
  4. LUMICA

    142 Pages

    En
  5. CON-AKTIV

    26 Pages

    En
  6. RELISTA

    38 Pages

    En
  7. STOREX

    96 Pages

    En
  8. TECFUNCTION

    10 Pages

    En
  9. Faucets

    80 Pages

    En
  10. Sinks

    68 Pages

    En
  11. General catalogue

    758 Pages

    En
  12. Tablon®

    104 Pages

    En