video corpo

SkyLine
1Pages

{{requestButtons}}

Catalog excerpts

SkyLine - 1

MEINERTZ SkyLine Use MEINERTZ SkyLine is a discreet and minimalistic solution for prevention of cold draught. The solution can be mounted both horizontally and vertically, it has a low height of only 70mm, and if required, the width can be kept at a minimum making it suitable for mounting on mullions or as an integrated convec-tor solution at glazing units. The nu-merous options makes the SkyLine suitable for both new built as well as refurbishments. Dsignation MEINERTZ SkyLine, type SL (number of water filled pipes) Example MEINERTZ SL03 Product MEINERTZ SkyLine is made of 70 x 11 x 2.0 mm pressure-stable steel tubing. The individual elements are spaced 27 mm apart. Dimension Depth: Number of elements X (27 + 11) - 27 mm Height: 70 mm Length: max 6000 mm The units can be produced in bespoke dimensions. Control and regulation It is possible to connect up to 3 units of 6000mm - giving a total lenght of 18 metres connected in one string. The heat output can be regulated by ordinary radiator or motorised valves. Connection 3/8" or 1/2" tappings can be placed in either the same or each end. If tap-pings at the same end including inter-nal baffle plates are required, follow-ing minimum widths are applicable: Min. SL04 when using 3/8" tappings Min. SL05 when using !4" tapings The options are many, and MEI-NERTZ can assist in making the correct solution. Surface finishing MEINERTZ SkyLine is supplied pow-der coated as standard in colours RAL 7024 (graphite grey), RAL 9007 (alu魭minium grey) or RAL 9016 (white). For a supplementary charge, the units can be supplied in other RAL colours. Packaging MEINERTZ SkyLine is carefully pack-aged in strong cardboard and wrapped in PE sheeting. Warranty A five-year guarantee against defects in materials or workmanship is of-fered, provided that the unit has been correctly handled and installed. Maintenance MEINERTZ SkyLine is very easy to clean, as the individual elements are spaced 27 mm apart. Cleaning may be performed with ordinary cleaning agents that do not contain abrasive. Scratches or damages to the surface lacquer may be repaired using tradi-tional spray paint, or by hand-painting with a thin brush. Heat output The estimated heat output at the tem- Air venting A 1/8" air vent is mounted. perature set 70/40/20 is 60 watts per metre of water-filled tube. Weight 2.31 kg/metre steel tubing. MEINERTZ A/S Sverigesvej 11 DK-8660 Skanderborg Telefon +45 8652 1811 Օ www.meinertz.com

Open the catalog to page 1

All Meinertz A/S catalogs and technical brochures

  1. SKA-Line

    1 Pages

  2. L-Line

    1 Pages

  3. Finned Tubes

    16 Pages

Archived catalogs