L-Line - 1 Pages
MEINERTZ L-Line is a unique and aesthetically attractive solution which can be used to counteract cold downdraughts
beside large glass panels, or as the primary heating source. It is mounted above the floor, and can thereby form an integrated design solution
together with the window panel; an efficient heat source which can be scaled as necessary and adapted to individual projects. Can be installed in both new and existing buildings.
MEINERTZ L-Line, type LL (number of water-bearing pipes).
Example: MEINERTZ L-Line, type LL06.
MEINERTZ L-Line is made of 70 x 11 x 2.0 mm pressure-stable steel tubing. The maximum number of water-filled steel tubes is seven. The individual e-lements are spaced 27 mm apart.
The estimated heat output at the temperature
set 70/40/20 is 55 watts per metre of water-filled pipe. Please contact
MEINERTZ A/S for estimated outputs
at other temperature sets.
Depth: Number of elements X (27 + 11) – 27 mm
Height: 200 – 350 mm
Length: Max. 3000 mm
The units can be produced in custom dimensions.
Control and regulation
The heat output may be regulated by ordinary radiator valves or motorised valves. It is possible to link up to three units together, to a maximum length of 3000 mm.
3/8” or 1/2” sockets, located at the front or back. The flow and return are both located on the same side, either to the right or left. When using motorised
valves, downward-oriented sockets
can be used.
1/8” air vents are installed in all water-bearing steel tubing.
2.31 kg/metre steel tubing.
MEINERTZ L-Line can cope with loads of up to 80 kg for a length of 3000 mm.
MEINERTZ L-Line is supplied powder coated as standard in colours RAL 7024 (graphite grey), RAL 9007 (aluminium
grey) or RAL 9016 (white). For a supplementary charge, the units can be supplied in other RAL colours.
MEINERTZ L-Line is carefully packaged
in strong cardboard and wrapped in PE sheeting.
We offer a five-year guarantee against defects in materials or workmanship, provided that the unit has been correctly
handled and installed.
MEINERTZ L-Line is very easy to clean, as the individual elements are spaced 27 mm apart. Cleaning may be performed with ordinary cleaning agents that do not contain abrasive. Scratches or damages to the surface lacquer may be repaired using traditional
spray paint, or by hand-painting with a thin brush.
Sverigesvej 11 · DK-8660 Skanderborg
Telefon +45 8652 1811 · www.meinertz.com