PR2787C - 1 Pages

Add to MyArchiExpo favorites
PR2787C

Catalog excerpts

TOILET PAPER DISPENSER SURFACE MOUNTED, JUMBO-ROLL TOILET TISSUE DISPENSER 400m STAINLESS STEEL AISI 304 BRIGHT FINISH General Description Jumbo-roll paper dispenser for industrial rolls of 400m, surface mounted stainless steel AISI 304 bright finish. Manual dispensing. Robust and vandal-proof. Suitable for very high traffic facilities. Model suitable for public use. It generally goes along with a toilet brush and waste receptacle and complemented by a warm air hand dryer. Components & Materials Stainless steel AISI 304 bright finish one-piece body, 0,8mm, round Ø310mm, with a catch system to prevent the opening of the lid. The supports of the screws in the back of the appliance, are acting as an anti-moisture support, as well as slots to avoid the screws damaging the toilet paper. It is mounted on the wall by means of 3 screws with their corresponding Ø6mm wall plugs (screws and wall plugs provided). It includes a lock system with standard mediclinics key, that allows opening the lid for replenishment. PA6 plastic axis, for standard Ø45mm paper rolls tube, with inertial anti-spin retainer. The axis allows the use of a standard paper roll in case of need. Stainless steel AISI 304 bright finish one-piece seamless lid, 0,8mm. Fixed to the body by means of rivets that allows swinging down of the lid for the replenishment. Frontal window indicates refill time. Technical Specifications Dimensions Max. Dimensions Weight (empty) Recommended installation height Recommended installation height for handicapped Paper roll capacity Paper roll 329x310x129mm capacity Paper roll 1,55 Kg diameter Ø310x129mm 65-75 cm to lower point 70 cm to lower point Paper roll width Paper roll tube diameter Operation Pull visible toilet paper, at your own convenience. Certificates & Qualifications ISO 9001:2008. Specification Surface mounted Jumbo-roll toilet tissue dispenser 400m shall be made of stainless steel AISI 304 bright finish one-piece body, 0,8mm, round Ø310mm, with a catch system to prevent the opening of the door. The supports of the screws in the back of the appliance shall act as an anti-moisture support, as well as slots to avoid the screws damaging the toilet paper. It shall be suitable to be mounted on the wall by means of 3 screws with their corresponding Ø6mm wall plugs (screws and wall plugs provided). It shall include a lock system with standard mediclinics key, that allows opening the lid for replenishment. The axis shall be made of PA6 plastic for standard Ø45mm paper roll tube, with inertial anti-spin retainer. The axis shall allow the use of a standard paper roll in case of need. The lid shall be made of stainless steel AISI 304 bright finish one-piece seamless, 0,8mm, fixed to the body by means of rivets that allows swinging down of the lid for the replenishment. The dispenser shall have a frontal window, which indicates refill time. Overall dimensions shall be Ø310x129mm. Jumbo-roll toilet tissue dispenser 400m shall be model PR2787C, stainless steel AISI 304 bright finish, of Mediclinics S.A., C/Industria 54, E-08025 Barcelona, Spain. Mediclinics, S.A., reserves the right to make changes and/or modifications to the products and their specifications without warning or notice. Revision 04-2013.0EU

 Open the catalog to page 1

All Mediclinics catalogs and technical brochures

  1. SIGNAGE

    4 Pages

  2. SOAP DISPENSERS

    14 Pages

  3. HAIR DRYERS

    10 Pages

  4. HAND DRYERS

    46 Pages

  5. Catalogue 2015

    160 Pages

  6. SOAP DISPENSERS

    10 Pages

  7. HAIR DRYERS

    10 Pages

  8. HAND DRYERS

    42 Pages

  9. Catalogue 2014

    163 Pages

  10. DJ0040CS

    1 Pages

  11. DTE0050CS

    1 Pages

  12. DJ0070AC

    1 Pages

  13. KIT SANIFLOW

    1 Pages

Archived catalogs