Mediflow Logic Dry M02A - 2 Pages

Add to MyArchiExpo favorites
Mediflow Logic Dry M02A

Catalog excerpts

HAND DRYER MEDIFLOW ® MEDIFLOW WITH THERMOSTATIC CONTROL SYSTEM WHITE EPOXY FINISH Code: M02A General Description • Warm air hand dryer. • Sensor operated by hand approximation. • Airflow temperature electronic regulation. • Maximum power and airflow. • Maximum robustness and vandal-proof. • Suitable for very high traffic facilities. • Also in recessed version conform to ADA projection requirements. • It normally goes along with a soap dispenser. Components & Materials • Metal sheet one-piece cover with white epoxy coated, 5/64” (1.9 mm) thick. Cover fixed to the base by means of 2 vandal-proof lock screws and lock with special mediflow ® key wrench. • Fire resistant plastic Noryl V0 base and fan scroll, with 4 Ø 5/16” (8 mm) holes for wall mounting. It includes silent-blocks to dampen mechanical vibrations. • Motor, universal with brushes, 4,500 rpm, A class, includes a safety thermostat. • Aluminum asymmetrical double inlet fan wheel. • Fe, Al & Cr taped winding coil filament resistor that incorporates a safety thermostat. Automatic disconnection ½ second before motor stop. Automatic regulation of air temperature on ambient temperature. • Adjustable (2”-8”) IR electronic detection sensor with polycarbonate viewing window. Selective detection of fixed targets and automatic disconnection system after 120 seconds of continuous use. Technical Specifications Voltage 110-120 V Total power 250- 2,250 W Frequency 50/ 60 Hz Motor power 1/3 hp Electrical isolation Grounding required Heating element power 0- 2,000 W Dimensions 10-3/4”W x12-5/8H x Consumption 6-1/2”D 2.1-19 A Weight 10.7 Lbs. 4,500 Effective airflow 265 CFM Nominal airflow 318 CFM Air velocity 5,195 LFM r.p.m. Air temperature 120 ºF (at 4” distance/70ºF) Estimated drying time 29 sec. Noise level 65 dB (at 79”) Dim ± 4% Operation Place the hands under the air outflow valve. The dryer will start automatically, and go on with no interruption as long as the hands are kept in the detection range of the sensor. As a safety measure, the appliance will stop after 120 seconds. Installation Screws are included. Please refer to Back Certificates & Qualifications UL comply with UL499 norm.

 Open the catalog to page 1

MOUNTING SERIAL MOUNTING Nº dryers to be fitted In toilet areas with a normal frequency of use and only one wash-basin: 1 dryer. In toilet areas with a normal frequency of use and more than one wash-basin: 1 dryer for each 2 wash-basins. 1 row of 4 wash basins: 2 dryers; 1 row of 6 wash basins: 3 dryers; 1 row of 8 wash basins: 4 dryers. In toilet areas with high traffic and more than one wash-basin: 2 dryers for each 3 wash-basins. 1 row of 4 wash basins: 3 dryers; 1 row of 6 wash basins: 4 dryers; 1 row of 8 wash basins: 5 dryers. Ideal location Between the wash-basin and exit. It is not...

 Open the catalog to page 2

All Mediclinics catalogs and technical brochures

  1. SIGNAGE

    4 Pages

  2. SOAP DISPENSERS

    14 Pages

  3. HAIR DRYERS

    10 Pages

  4. HAND DRYERS

    46 Pages

  5. Catalogue 2015

    160 Pages

  6. SOAP DISPENSERS

    10 Pages

  7. HAIR DRYERS

    10 Pages

  8. HAND DRYERS

    42 Pages

  9. PR2787C

    1 Pages

  10. Catalogue 2014

    163 Pages

  11. DJ0040CS

    1 Pages

  12. DTE0050CS

    1 Pages

  13. DJ0070AC

    1 Pages

  14. KIT SANIFLOW

    1 Pages

Archived catalogs