DJ0040CS - 1 Pages

Add to MyArchiExpo favorites
DJ0040CS

Catalog excerpts

SOAP DISPENSER VERTICAL, WALL MOUNTED STAINLESS STEEL AISI 304 SATIN FINISH General Description Liquid soap dispenser made of stainless steel AISI 304, satin finish, wall mounted. Push-button operated. Robust and vandal-resistant. Suitable for high traffic facilities. Model suitable for public use. It normally goes along with a warm air hand dryer. Opening on top with provided mediclinics key that allows soap loading. Vandal resistant locking cover. Allows disinfectant solutions, liquid soaps or hydro-alcoholic gel. Surgical soaps and soaps with solid abrasive particles are not supported. Components & Materials Stainless steel AISI 304 body, 0,8mm thickness, satin finish. Stainless steel AISI 304 base plate, 0,8mm thickness, raw finish. Push button made of POM thermoplastic with stainless steel cover 0,8mm thickness. It is mounted on the wall by means of 3 stainless steel screws with their corresponding Ø6mm wall plugs (the upper ones attach the dispenser whilst the lower one fix it to the wall) (screw and wall plugs are provided). Inner tank made of 2,5mm thickness translucent PP. Access to its interior using a standard mediclinics key supplied. Inner tank lid made of 2 mm thickness translucent PE-LD. Black ABS plastic, anti-dripping and anti-corrosion valve. Housing with one viewing slot. Technical Specifications Dimensions Weight (empty dispenser) Recommended installation height Push-button 15-20 cm from shelf Stainless steel Capacity Liquid soaps allowed Quantity dispensed per pulsation Operable force Operation Press push-button manually to dispense a measured amount of liquid soap. Valve is operable with one hand. Specification Wall mounted soap dispenser, robust and vandal-resistant with a body made of stainless steel AISI 304, 0,8mm thickness, satin finish. Base plate made of stainless steel AISI 304, 0,8mm thickness, raw finish. Push-button made of POM with stainless steel cover 0,8mm thickness. It should be mounted on the wall by means of 3 stainless steel screw with their corresponding Ø6mm wall plugs, screws and wall plugs provided; the upper ones attach the dispenser, whilst the lower one fixes it to the wall. The dispenser should include an anti-dripping and anti-corrosion valve. The container should be 2,5mm thick, translucent PP with a 2mm thickness lid made of translucent PE-LD and the access to its interior should be using a standard mediclinics key supplied. The dispenser should be provided with one viewing slot. The soap dispenser should be suitable for disinfectant solutions, liquid soaps or hydro-alcoholic gel. Surgical soaps and soaps with solid abrasive particles are not supported. Overall dimensions shall be 275x100x128 mm. Liquid soap dispenser shall be model DJ0040CS, stainless steel AISI 304, satin finish, manufactured by Mediclinics S.A., C/Industria 54, E-08025 Barcelona, Spain. Mediclinics, S.A., reserves the right to make changes and/or modifications to the products and their specifications without warning or notice. Revision 04-2013.0EU

 Open the catalog to page 1

All Mediclinics catalogs and technical brochures

  1. SIGNAGE

    4 Pages

  2. SOAP DISPENSERS

    14 Pages

  3. HAIR DRYERS

    10 Pages

  4. HAND DRYERS

    46 Pages

  5. Catalogue 2015

    160 Pages

  6. SOAP DISPENSERS

    10 Pages

  7. HAIR DRYERS

    10 Pages

  8. HAND DRYERS

    42 Pages

  9. PR2787C

    1 Pages

  10. Catalogue 2014

    163 Pages

  11. DTE0050CS

    1 Pages

  12. DJ0070AC

    1 Pages

  13. KIT SANIFLOW

    1 Pages

Archived catalogs