Electrical The luminaire provides switch-selecta-ble settings for operation on 50 and 60 Hz supplies at 100, 120, 210, 230, and250 volts. It is fitted with a three-prongmale IEC socket for connection to AC power. The luminaire is electrically grounded. The luminaire conforms toCE safety standards EN 60598-1 andEN 60598-2-17, and to CE electromag- netic compatibility standards EN 50 081-1 and EN 50 082-1. The luminaireis cETL certified for compliance withCSA standard C22.2 No. 166, and ETL certified for compliance with ANSI/UL standard 1573. (Certification pending.) Environmental The luminaire must be located in a dryarea in which the ambient temperaturedoes not exceed 40°C (104°F). Physical Size: 390 x 316 x 415 mm (15.4 x 12.4 x16.3 in.) Weight: 11.6 kg (25.5 lbs)

Specifications MiniMAC Wash

Description

Maximum power and current

Accessories

The MiniMAC Wash is an automatedmoving-head Fresnel washlight thatprovides 12 dichroic color filters, high-speed mechanical shutter furniture, 540°of panby 270°of tilt, user selectable 23°or40°soft-edged design beams, 3-digit LEDcontrol panel, and switch-selectablepower supply settings. It uses a 150Watt discharge source and may beoperated with Dmx controllers, theMartin MC-1 remote control, and as astand-alone unit with programmable7-scene sequence, random action, andmaster/ slave capability. OptionWattsAmps • G-clamp: P/N 91602003 100 V: 220 W, 2.7 A 120 V: 210 W, 2.0 A 210 V: 200 W, 1.3 A 230 V: 200 W, 1.1 A 250 V: 210 W, 1.0 A • Half-coupler clamp: P/N 91602005 • 2-unit flight case: P/N 91510007

Specification

General The luminaire is an automated movinghead Fresnel washlight employing a 150 watt discharge professional lamp as the light source. The luminaire is the MartinMiniMAC Wash.

Design standards

Mechanical effects • Canadian safety: CSA C22.2 No. 166 The luminaire provides one wheel with12 fixed dichroic glass color filters and an open position. The color wheel rotates continuously and is positionablebetween filters. The luminaire providesa mechanical shutter to open and close the light output .The shutter provides variable speed strobe effects at up to11 flashes per second. The head of theluminaire rotates 289°on the tilt axis. It is mounted on a single arm that rotates 540°on the pan axis. Control • EU EMC: EN 50 081-1, EN 50 082-1 The luminaire responds to commandsignals from USITT DMX512 compa-tible control devices and the Martin MC-1 remote control unit. For serial data transfer, one 3-pole male and one3-pole female XLR socket is provided.The luminaire provides an automatic stand-alone mode with user-definable pan and tilt range, and a programmablestand-alone mode with up to sevensequential scenes. The automatic stand-alone mode is sound-activated or self-activated at user option. All user-selected home software settings are adjust-able via an onboard control panel with LED display or via a remote controlunit. Firmware updates are installablefrom a remote location via a serial upload. • EU safety:EN 60598-1,EN 60598-2-17 • US safety: ANSI/UL 1573 Performance

Physical

The luminaire emits a luminous flux of2600 lumens in a 40°soft-edged fieldwhen fitted with a new lamp. • Length: 390 mm (15.4 in)

Electromechanical effects

• Width: 316 mm (12.4 in) • Color wheel: 12 colors + open, continuous rotation • Height: 415 mm (16.3 in) Housing • Weight: 11.6 kg (25.5 lbs) • Shutter: variable strobe up to11.4 Hz The exterior of the luminaire isconstructed of high temperature UV-resistant fiberglass-reinforcednylon. The housing provides a protec-tion factor of IP 20. The exterior shell color is black (titanium) (white).
©November 2002 Martin Professional A/SSpecifications are subject to change without notice • Pan: 540°in 0.013°steps

Source

• Tilt: 270°in 0.007°steps • Lamp: 150 W discharge Installation • Approved models: Martin Metal Halide, Osram HTI

Construction

• Housing:UV-resistant fiber-rein- forced composite The luminaire operates in any orienta-tion. It is furnished with a bracket towhich a mounting clamp may be bol-ted. The bracket attaches to the base with quarter-turn fasteners. When installed above floor level, secondary attachment is fastened to the base ofthe luminaire. • Base: GY 9.5 • Control: remote switchable • Finish: integral black color or poly-urethane coating

Performance

• Available colors:black,white,titanium • Light output: 2600 lumens • Protection factor: IP 20

Thermal Installation

• Maximum ambient temperature (Ta): 40°C (104°F) • Mounting points: 1 pair of 1/4-turn home locks for clamp bracket • Maximum surface temperature: 60°C (140°F) • Orientation: any • Minimum distance to combustible materials: 0.3 m (12 in) • Total heat dissipation: 700 Btu/hr • Minimum distance to illuminated surfaces: 0.3 m (12 in)

Control and programming

• Control options: DMX-512, MC-1, stand-alone, master/slave • Minimum clearance around contemporary fan and air vents: 0.1 m (4 in) • Stand-alone triggers: music, internal timer • Minimum center-to-center installationdistance: 316 mm (12.4 in) • Stand-alone programs: automatic and programmable 7-scene sequence

Ordering information

• Receiver: RS-485 • MiniMAC Wash, in cardboard, black:P/N 90230400 • Setting and addressing: 3-digit LED control panel, remote w/ uploader • MiniMAC Wash, in cardboard, white:P/N 90230430 • Firmware update: serial upload (MUF) • DMX speed control: tracking and/or vector • MiniMAC Wash, in cardboard, titanium: P/N 90230432 • DMX channels: 4 - 8 • Pan/tilt resolution: 8- and 16-bit

Included items

• Data I/O: locking 3-pin XLR, pin 1 shield, pin 2 cold (-), pin 3 hot (+) • Lamp: Martin Metal Halide 150, P/N 97010107 • Mains cable: 3 m, 3-pin IEC, P/N 11501013

AC Supply

• AC input: 3-pin IEC male socket • Data cable: 5 m, black, 3-pin XLR, P/N11820008 • Power supply options: 100/120/210/230/250 V, 50/60 Hz • Clamp attachment bracket: P/N 56600016 • Safety cable eye bolt: P/N 08131901 • User manual: P/N 35000084

Martin Professional A/S • Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • Internet: www.martin.dk