Catalogue Martin RGB Laser 1.6 Brochure
www.martinarchitectural.com
print switch display
Page / 8
Contact the
Manufacturer
Where to buy
this product ?
martin architectural - 27993, 27553
/ 8
See other catalogues for martin architectural
Text version of the page
THERMAL Maximum ambient temperature (Ta): 40° C (104° F)Minimum ambient temperature (Ta): 5° C (41° F) non-condensingReommended storage temperature: 20° C (68° F) to 25° C (77° F)Cooling: Forced air cooling system APPROVALS EU safety: EN 60825-1, EN 60950EU EMC: EN 55022, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3US safety (pending): IEC 60825-1 / FDA Laser Notice 50US Federal Standard (pending): 21 CFR 1040.10 and 1040.11 PROJECTOR FURNITURE Horizontal projection angle: 60° Vertical projection angle: 60° SASRT (step response time): 0.3 ms CONSTRUCTION Housing: AluminumFinish: BlackProtection rating: IP 20 INSTALLATION Orientation: AnyMinimum distance to persons and objects in beam zone: 2 m (6.6 ft.)Minimum height above publicly accessible floor: 3 m (9.8 ft.)Minimum distance to combustible materials: 1 m (3.3 ft.)Minimum distance to illuminated surfaces: 2 m (6.6 ft.)Minimum clearance around device: 30 cm (11.8 in.)Relative humidity limits: 0% - 90% non-condensing INCLUDED ITEMS CD with Martin RGB Laser Show software furniture, cue library and firmware P/NTwo security keys P/N Interlock connector (AMP) P/NAdjustable mounting yoke P/NUSB cable P/N 3 m power cable, IEC, Schuko plug P/N 1.8 m power cable, IEC, US plug P/N 1.8 m power cable, IEC, without plug P/N ACCESSORIES Emergency switch ORDERING INFORMATION Martin RGB Laser 1.6 in cardboard box: P/N 90432000Martin RGB Laser 1.6 in flight case: P/N 90432001 CONNECTIONS AC power input: 3-pin IEC male socket, cable suppliedAnalog (ILDA) in/out: 25-pin sub-D DMX data in/out: 5-pin locking XLRProgramming and uploads: USB 2.0

Martin RGB Laser 1.6 CLASS 4 Specifications

PHYSICAL ELECTRICAL Length: 290 mm (11.4 in.) Width: 204 mm (8.0 in.) Height: 178 mm (7.0 in.) Length including mounting yoke: 326 mm (12.8 in.)Height including mounting yoke: 260 mm (10.2 in.)Weight: 11.2 kg (24.7 lbs.) AC power: 100-240 V nominal, 50/60 HzMain fuse: 2.5 AT (slow blow) CONTROL AND PROGRAMMING TYPICAL POWER AND CURRENT Control options: DMX, ILDA, PC software (supplied), standalone autostart modeResolution x and y: 12-bit Resolution RGB intensity: 8-bit DMX channels: 4, 8, 12 or 16 Stand-alone memory: 128 MB, 432 linkable/loopable cuesDMX address setting: PC software, onboard control panelStand-alone programming: PC softwareProtocol: USITT DMX 512 (1990) 100 V, 60 Hz: 180 W, 1.8 A110 V, 60 Hz: 180 W, 1.7 A 115 V, 60 Hz: 180 W, 1.7 A 120 V, 60 Hz: 180 W, 1.7 A220 V, 50 Hz: 180 W, 0.7 A230 V, 50 Hz: 180 W, 0.7 A 240 V, 50 Hz: 180 W, 0.7 A Figures listed are typical, not maximum. Allow for +/- 10% variation. LASER Class: 4Type: Diode laser, cw emission P lambda 440 nm - 660 nm: Max. 2000 mW cwWhite light output: 1.3 W Maximum output: 1.6 W Beam divergence: 0.8 mrad Wavelengths Red: 655 nm +/- 5 nm Green: 532.5 nm +/- 0.5 nm Blue: 442 nm +/- 3 nm Blue: 442 nm + / 3 nm
Martin Professional A/SOlof Palmes Allé 18 8200 Aarhus N, DenmarkPhone: +45 87 40 00 00 Fax: +45 87 40 00 10www.martin.com
ArchiExpo's Virtual Library: PDF Catalogues | Documentation | Brochures | Manuals | Directory | Specifications | Characteristics
Search Go
page 1 p.1
page 2 p.2
page 3 p.3
page 4 p.4
page 5 p.5
page 6 p.6
page 7 p.7
page 8 p.8
pdf-page pdf ae En 2008-11-47-22