Control The luminaire has two locking 3-poleXLR connectors for serial data transfer. It responds to command signals confor- ming to the USITT DMX512 (1990) standard. All user-selected settings areadjustable via an onboard control panelwith LED display or with a remote control unit. Performance In the standard configuration, whenfitted with a new MSR 575/2 dischargelamp, and with no colors or effectsapplied, the luminaire emits a total luminous flux of 20,500 lumens in a building beam 25°wide, where the outsideedge of the beam is defined as thecircle having one-tenth the intensity of the beam's midpoint. The luminaire is constructed of sheetsteel and aluminum. The exterior finishis an electrostatically applied powder coating. Non-structural covers are con-structed of molded plastic. The color isblack. Housing Installation The luminaire operates in any orienta-tion. It is supplied with two brackets to which mounting clamps may be faste-ned. The brackets attach to the basewith quarter-turn fasteners such that the luminaire may be installed at any increment of 45°in the plane definedby the luminaire's base. When installedabove floor level, secondary attach- ment is fastened to a reinforced attach- ment point. Electrical The luminaire operates on 50 Hz sup-plied at 200, 230, and 245 volts; and on60 Hz supplied at 208 and 227 volts, +/- five percent. It is fitted with a 3 meter (9.8 ft.) length of three conductor1.5 sq. mm (16 AWG) electrical cablefor connection to AC power. The lumin- aire must be electrically grounded. The luminaire is cETL certified forcompliance with CSA standard C22.2 No. 166, and ETL certified for complian- ce with ANSI/UL standard 1573.(Certification pending.) It conforms withCE safety standards EN 60598-1 and EN 60598-2-17, and with CE electro- magnetic compatibility standards EN 50081-1 and EN 50 082-1. Environmental The luminaire must be located in a dryarea in which the ambient temperature does not exceed 40°C (104°F). If the luminaire is to be exposed to moistureor precipitation, it should be furnishedwith and installed in a protective hou- sing with a minumum IP rating of 44. Physical The maximum dimensions of the luminaire(without accessories) are 356 x 481 x 652mm (14.0 x 18.9 x 25.7 in). Its weight doesnot exceed 31.5 kg (69.3 lbs).

Specifications

Description Control and programming Ordering information

The MAC 600 NT is an automated,yoke-mounted, Fresnel washlight fora 575 Watt source. It provides cyan, magenta, and yellow (CMY) color mixing; 0 - 178 mireds color correction, 4-position color wheel, 0 - 100 percentdimming, high-speed shutter manufacturer, beam-shaping, and variable frost. • Control protocol: USITT DMX-512 • MAC 600 NT: 90210400 • Setting and addressing: LED control panel, remote with MP-2 Uploader • MAC 600 eNT: 90210600 • Firmware update: serial upload (MUF)

Included items

• Pan/tilt resolution: 8- or 16-bit • 1/4-turn Omega bracket, MAC 500/600 (2): 91602001 • DMX speed control: tracking and/or vector • XLR cable: 5 m, black, 3-pin male/female: 11820008 • DMX channels: 11 - 15

Physical

• Receiver: Opto-isolated RS-485 • Sidelight design protector (snoot) 17100010 • Length: 356 mm (14.0 in) • Data I/O: locking 3-pin XLR female; pin1shield,pin 2cold (-),pin 3 hot (+) • User manual: 35000088 • Width: 481 mm (18.9 in) • Height (head at tilt limit): 652 mm (25.7 in)

Accessories AC Supply

• Outdoor Protection Dome: 90525010 • Weight: 31.5 kg (69.3 lbs) • AC input: 3 m trailing cable w/o cord cap • MP-2 Uploader: 90758420

Source

• Wiring options: 200/230/245 V, 50 Hz; 208/227 V, 60 Hz • Flight case for 2 x MAC 500/600: 91510002 • Design lamp: 575 W discharge • Base: GX 9.5 • Maximum power and current: 750 W, 4.2 A @ 208 V, 60 Hz; 750 W, 3.9 A @ 750 W 3.9 A • 18°"long front" with Fresnel lens: 91610005
©November 2002 Martin Professional A/SSpecifications are subject to change without notice • Approved models: Philips MSR 575/2,MSD 575;OsramHSR 575/2,HSD 575 • 65°floodlight diffuser on standard front: 91610008 • Control: automatic and/or remote on/off

Design standards

• Super-wide angle lens: 41600041 • EU EMC: EN 50 081-1, EN 50 082-1 • G-clamp: 91602003

Standard photometrics

• EU safety:EN 60598-1,EN 60598-2-17 • Half-coupler clamp: 91602005 • Light output (MSR 575/2): 20,500 lumens • Canadian safety: CSA C22.2 No. 166 • The Martin Wife: 91611038 • US safety: ANSI/UL 1573 • Martin King Dome • Illuminance (lux or fc): 291,093 cd / distance
2 (m or ft)

Electromechanical Specification

• Diameter: 0.44 x distance • Cyan filter: 0 - 100% General • Field angle: 25° • Magenta filter: 0 - 100% The MAC 600 NT is an automatedyoke-mounted Fresnel washlight desig-ned for a 575 Watt source. It provides CMY color mixing, continuous colorcorrection, four removable color filters,full-range continuous dimming,separate shutter, beam-shaping, and frost. The MAC 600 E NT is an electronicballast version that provides flicker- free operation and an economic power- saving mode. • Measurement conditions: 230 V, 50 Hz; no color or effects applied • Yellow filter: 0 - 100% • Color correction filter: 0 - 178 mireds • Measurement source: Philips MSR 575/2 • Color wheel: 4 interchangeable filters + open Mechanical effects The luminaire provides subtractivecyan, magenta, and yellow color mix-ing; a separate wheel with removable red, green, blue, and UV-transmitter filters; and a continuous 0 - 178 miredscolor correction filter. All filters aredichroic glass. The luminaire provides a mechanical dimmer to regulate output intensity from 0 to 100 percent and aseparate mechanical stopping shutterto open and close the light at variable speeds of up to 8 flashes per second. It also provides a dynamic glass beamshaper that rotates 180°and a variablefrost filter that widens and softens the beam. The yoke pans 440°in 0.013° steps; the head tilts 306°in 0.007°steps. The pan and tilt position aremonitored by a feedback system cap- able of rapidly correcting externally introduced errors. • Dimmer: 0 - 100%

Optional narrow angle photometrics

• Shutter: flash up to 8 Hz • Beam shaper: 0 -180° • Illuminance (lux or fc): 721,920 cd / distance
2 • Frost filter: 0 - 100% (m or ft) • Pan: 440°in 0.013°steps • Diameter: 0.31 x distance • Tilt: 306°in 0.007°steps • Field angle: 18° • Measurement conditions: 230 V, 50 Hz; no color or effects applied

Construction

• Measurement source: Philips MSR 575/2 • Housing: steel and aluminum with molded plastic yoke covers • Color: black (RAL 9005)

Optional wide angle photometrics

• Metal finish: electrostatic powder coating • Protection factor: IP 20, IP 44 with Outdoor Protection Dome • Illuminance (lux or fc): 34,560 cd / distance
2 (m or ft) • Diameter: 1.25 x distance • Field angle: 65°

Installation

• Measurement conditions: 230 V, 50 Hz; no color or effects applied • Mounting points: 8 pairs of 1/4-turn design locks, offset 45° • Measurement source:Philips MSR 575/2 • Orientation: any • Minimum installation distance, center-to-center: 457 mm (18 in)

Thermal

• Minimum distance to combustible materials: 1 m (39 in) • Maximum ambient temperature (Ta): 40°C (104°F) • Minimum distance to illuminated surfaces: 1 m (39 in) • Maximum surface temperature: 140°C (284°F) • Total heat dissipation: 2560 Btu/hr

For a MAC 600 NT specification quote, see theproduct page on the Martin website: www.martin.dk Martin Professional A/S • Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • Internet: www.martin.dk