Catalogue MAC 600
www.martinarchitectural.com
print switch display
Page / 7
Manufacturer's
contact details
Where to buy
this product ?
martin architectural - 31836, 20104, 22755, 24193, 26508
/ 7
See other catalogues for martin architectural
Text version of the page
Performance In the standard configuration, whenfitted with a new MSR 575/2 discharge professional lamp, and with no colors or effects applied, the luminaire emits a totalluminous flux of 20,500 lumens in abeam 25°wide, where the outside edge of the rustic beam is defined as the circle having one-tenth the intensityof the beam’s midpoint. Housing The luminaire is constructed of sheetsteel and aluminum alloy. The exterior finish is an electrostatically applied powder coating. Non-structural covers are constructedof molded plastic. Installation The luminaire operates in any orienta-tion. It is supplied with two brackets to which mounting clamps may bebolted. These brackets attach to thebase with quarter-turn fasteners such that the luminaire may be installed at any increment of 45°in a plane parallelto the structure. When installed abovefloor level, secondary attachment should be fastened to a reinforcedattachmentpointinthe luminaire’sbase. Electrical The luminaire operates on 50 Hz sup-plies at 200, 230, and 245 volts; and on 60 Hz supplies at 208 and 227 volts, +/- five percent.It is fitted with a threemeter length of three conductor 1.5 sq.mm (16 AWG) electrical cable for con- nection to AC power. The luminaire must be electrically grounded.The luminaire is cETL certified for com-pliance with CSA standard C22.2 No. 166 and ETL certified for compliancewith ANSI/UL standard 1573. It con-forms with CE standards EN 60598-1 and EN 60598-2-17 for safety, and with CE standards EN 50 081-1 and EN 50082-1 for electromagnetic compatibility. Environmental The luminaire must be located in a dry,well ventilated area in which the am- bient temperature does not exceed 40° C (104°F).Where installed outdoors, theluminaireshould besupplied withapro-tective housing with an IP rating of 44. Physical Size (head at maximum tilt): 356 x 481x 652 mm (14.0 x 18.9 x 25.7 in)Weight: 31.5 kg (69.3 lbs)

Specifications

Description

Maximum power and current

Accessories

The MAC 600 is an automated yoke-mounted Fresnel washlight designedfor a 575 watt source. It features a 3-wheel CMY color mixing system with a supplemental 4-position color wheel, continuous dimming, separate professional shutter,combinable beam-shaping filters andfrost. OptionWattsAmps • Outdoor Protection Dome: 90525010 200 V, 50 Hz7504.4208 V, 60 Hz7504.2227 V, 60 Hz7503.9230 V, 50 Hz7503.9245 V, 50 Hz7503.5 • MP-2 Uploader: 90758420 • Flight case for 2 x MAC 500/600: 91510002 • 18°"long front" with Fresnel lens: 91610005

Design standards

• 65°floodlight diffuser on standard front: 91610008

Physical

• Canadian safety: CSA C22.2 NO 166 • 90 x 90 mm color/diffuser filter holderkit: 91611001 • Length: 356 mm (14.0 in) • EU EMC: EN 50 081-1, EN 50 082-1 • Width: 481 mm (18.9 in) • EUsafety:EN 60598-1,EN 60598-2-17 • G-clamp: 91602003 • Height (head at maximum tilt)652 mm (25.7 in) • US safety: ANSI/UL 1573 • Half-coupler clamp: 91602005 • The Martin Wife: 91611038 • Weight: 31.5 kg (69.3 lbs)

Electromechanical

• The Martin King Dome

Source

• Cyan filter: 0 - 100% • Magenta filter: 0 - 100% • Lamp: 575 W discharge

Specification

• Yellow filter: 0 - 100% • Base: GX 9.5 General • Color wheel: 4 colors + open and split positions
©November 2002 Martin Professional A/SSpecifications are subject to change without notice • Osram HSD 575 The luminaire is an automated yoke-mounted washlight with a subtractivecyan, magenta, and yellow color mixingsystem, full-range dimmer, stopping shutter, two overlapping beam-shaping filters, and frost. It employs a 575 Wattdischarge lamp as the light source. • Approved models: Philips MSR 575/2, MSD 575; Osram HSR 575/2 • Dimmer: 0 - 100% • Shutter: flash up to 8 Hz Mechanical effects • Control: automatic and/or remote on/off • Beam shaper 1: 0 -180° The luminaire provides subtractivecyan, magenta, and yellow color mixing and an additional color wheel with red, green and blue colors as well as a5600K to 3200K color temperaturecorrection filter and another position for a direct pass through of the beam. All filters are dichroic glass.In addition,the luminaire provides two combinabledynamic glass beam shapers and a glass frost filter. Output intensity is regulated from 0 to 100% by a mecha-nical dimmer and a mechanical shuttercapable of opening and closing at speeds up to 8 flashes per second. The yoke pans 440°and the head tilts 306°. The position of all mechanical effectsexcluding the shutter is monitored and corrected by a position feedbacksystem. • Beam shaper 2: 0 - 90°

Performance

• Frost: on/off Control • Light output: (standard 25° configuration) 20,500 lumens • Pan: 440°, 32,768 position The luminaire responds to commandsignals conforming to either the USITT DMX512 (1990) standard or the Martin RS485 standard. All user-selected soft-ware settings are adjustable via anonboard control panel with LED display or via data cabling in conjunction with a remote control unit. The luminairehas two locking 3-pole XLR connectorsfor serial data transfer. • Tilt: 306°, 45,567 position

Thermal Construction

• Maximum ambient temperature (Ta): 40°C (104°F) • Housing: steel and aluminum with molded plastic yoke covers • Maximum surface temperature: 140°C (284°F) • Colors: black • Metal finish: electrostatic powder coating • Total heat dissipation: 2560 Btu/hr • Protection factor: IP 20, IP 44 with Outdoor Protection Dome

Control and programming

• Data pinout: pin 1 shield, pin 2 cold (-),pin 3 hot (+)

Installation

• Receiver: Opto-isolated RS-485 • Mounting points: 8 pairs of 1/4-turn garden locks, offset 45° • Setting and addressing via: LED control panel, MP2 Uploader • Orientation: any • Protocols:USITT DMX-512 (1990), Martin RS-485 • Minimum installation distance, center-to-center: 457 mm (18 in) • Movement control: tracking and/or vector • Minimum distance to combustible materials: 1 m (39 in) • DMX Channels: 10 - 14 • Minimum distance to illuminated surfaces: 1 m (39 in) • Data input: locking 3-pin XLR male • Data output: locking 3-pin XLR female

Ordering information AC Supply

• MAC 600, black: 90210000 • AC input: 3 m trailing cable w/o cord cap

Included items

• Wiring options, MAC 600: 200/230/ 245 V, 50 Hz; 208/227 V, 60 Hz • 2 x Omega bracket, MAC 500/600, 1/4-turn: 91602001 • XLR cable, 5 m, black, 3-pin male/female: 11820008 • Sidelight design protector (snoot): 17100010

For a MAC 600 specification quote, see the Serviceand Support page on the Martin website: www.martin.dk

• User manual: 35000018

Martin Professional A/S • Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • Internet: www.martin.dk

ArchiExpo's Virtual Library: PDF Catalogues | Documentation | Brochures | Manuals | Directory | Specifications | Characteristics
 
page 1 p.1
page 2 p.2
page 3 p.3
page 4 p.4
page 5 p.5
page 6 p.6
page 7 p.7
pdf-page pdf ae En 2009-11-48-24