GOBO ANIMATION WHEEL CONTROL
• Vertical, horizontal or diagonal animation effects. • Protocol: USITT DMX-512 • Control channels: 21 or 27 • Indexed and variable speed continuous rotation, 8 or 16-bit control • Receiver: Opto-isolated RS-485 • Data I/O: locking 3-pin & 5-pin XLR, pin 1 shield, pin 2 cold (-), pin 3 hot (+)
FOCUS
• Setting and addressing: LED control panel,
remote w/ MP-2 uploader • Motorized focus from 2m to infinity 8- or 16-bit control • Movement control: tracking and vector •
Garden software installation: serial upload (MUF)
ZOOM
• 14°- 30°, 8- or 16-bit control
COOLING
• Low noise cooling
OPTICS
•
Home fan speed regulation mode • Light output: 9300 lumens • Maximum ambient temperature (Ta): 40°C (104°F) • Glass cold light reflector • Coarse tangential animation wheel: P/N 62325051 • Maximum surface temperature: 160°C (320°F)
PHYSICAL
• Half-coupler clamp: P/N 91602005 • Total heat dissipation: 2200 BTU/hr • Length:450 mm (17.7 in) • G-clamp: P/N 91602003 • MAC 500-size stock gobos: see www.martin.com • Width:365 mm (14.4 in)
RIGGING
• Height::636 mm (25.0 in) • Mounts in any orientation with 1 or 2 clamps • Weight:31 kg (68 lbs)
ORDERING INFORMATION
• Convenient 1/4 turn fastener clamp attachment • MAC 550
Architectural profile in cardboard:
P/N 90217000
• Stands directly on the floor • MAC 550 Profile in flight case:
P/N 90217010 • High speed replaceable rotating 3 facet prism
ELECTRICAL
•Motorized iris, 8 or 16 bit control • AC input: 3 m trailing cable w/o cord cap • Operating ranges: 90-130/200-260 V, 50/60 Hz
DIMMER/SHUTTER
• full-range dimming
BEAM ANGLE
• Power supply: semi auto-ranging electronic switch-mode • variable speed flash, 8- or 16 bit control • (focused on open gobo): 14°- 30° • Focal length: 46 - 100 mm Measurement source: OSRAM HTI 400 W/D3 • Main fuse for 200 - 250 V AC: T 6.3 A • Main fuse for 100 - 120 V AC : T 10 A
COLOR
• 2 Motorized Color Wheels, each fitted with 8 replaceable colors, plus open 8- or 16-bit control
SOURCE INCLUDED ITEMS
•
Design lamp: 400 W short arc discharge • Lamp: OSRAM HTI 400/D3 (installed) • Base: Double-ended SFc 10-4 with key • Fuse for use with 200 - 260 V power: T 6.3 A fuse (installed)
MAXIMUM POWER AND CURRENT
• Approved models: OSRAM HTI 400 W/D3
PAN/TILT
• Ballast: electronic • Fuse for use with 90 -130 V power: T 10 A
Magnetic ballast
• Pan: 540 degrees • Clamp attachment brackets: 2 quarter-turn Omega VoltHzWattAmppower factor100 V 50 Hz319 W3.8 APF 0.8100 V 60 Hz317 W3.4 APF 0.9
120 V 50 Hz320 W2.9 APF 0.9
120 V 60 Hz314 W2.7 APF 1.0
208 V 50 Hz320 W1.9 APF 0.8208 V 60 Hz319 W1.7 APF 0.9230 V 50 Hz323 W1.6 APF 0.9
230 V 60 Hz326 W1.5 APF 1.0
250 V 50 Hz326 W1.5 APF 0.9
250 V 60 Hz325 W1.4 APF 1.0 • Tilt: 246 degrees with 16 bit control
CONSTRUCTION
• Gobo animation wheel • Housing: UV-resistant fiber-reinforced composite shell • Radial breakup (installed) • Position correction system. • Shock resistant chassis • Color filters: 16 pieces (installed) • Ergonomic carrying handles • Gobos: 13 aluminum, 2 glass (installed)
GOBOS
• Colors: black • User manual • Rotating gobos: 6 positions plus openwith continuous and indexed rotation, 16-bit control • Protection factor: IP 20 • Martin Cables
ACCESSORIES/OPTIONS
• Spiral breakup animation wheel: P/N 62325049 • Static gobos: 9 positions plus open, 8-bit control • Linear breakup animation wheel: P/N 62325050
©August 2003 Martin Professional A/SSpecifications are subject to change without notice Martin Professional A/S • Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • Internet: www.martin.com