Operation Control

The MAC 2000 Wash uses Martin’s own 3-Phase motor technology to ensure that multiple parameters such as speed and smooth linear movement are guaranteed - an important requirement for theater applications.Pan movement is 540Ëš with a tilt range of 267Ëš, andpan/tilt speed is fast and instant.The MAC 2000 Wash employs an intelligent positioncorrection system that automatically returns the luminaire to its original position, if accidentally knocked out of place.The fixture is fitted with a new, specially engineeredmulti-layered PCB that swivels out for easy maintenance. A user-friendly 4-digit LED display for easy fixture programming is standard. The display provides easy to use maintenance menus and concise error messages.Architectural software can be easily uploaded via a serial link usingthe Martin MP2 Uploader, a maintenance device that stores up to 14 fixture personality files.The MAC 2000 Wash has both 3 pin and 5 pin XLRconnectors on board for its DMX control connection. The fixture uses either 19 or 21 channels, depending on whether you select 8 or 16 bit movement control.5 channels of DMX allocation are included in thefixture personality for the motorized barn door system - whether they are connected to the fixture or not. These channels have been included to save on re- programming should you wish to add barn doors manufacturers after a fixture has been hung and programmed.

Electrical

As a first for this type of fixture, the MAC 2000 Washis fitted with a switch mode power supply. This auto detects the local voltage and frequency being supplied to the fixture and adjusts its power settings automatically without the need for any re-wiring by technicians. This is a useful feature when traveling from one country to another with a different electrical supply, or if you are running equipment from generators one day and a mains system the next. The switch mode power supply operates at 50 or 60 Hz at voltages from 100–130 and 200–260.Electronic ballast gives the added advantages of flicker free operation, hot lamp suppliers restrike, extended lamp life and a 700 Watt power-saving mode. This feature activates automatically when the shutter manufacturers is employed for more than 10 seconds. The power reverts to 1200 Watts when the shutter is reopened.