MAC 2000 WASHSPECIFICATIONS

AC Supply Photometrics (Optional) Ordering information

•AC input: 3 m trailing cable w/o cord cap •Operating ranges: 100-130 / 200-260 V, 50 / 60 Hz•Power supply: Electronic auto-ranging •Measurement conditions: Super-wide-angle lens, 50 mm aperture ring (A range of aperture rings are included that enable narrower building beam angles - 30 mm (1.2 in), 40 mm (1.6 in), 45 mm (1.8 in), and the standard 50 mm (2 in))•Hyper mode: beam angle 85°Illuminance (lux or fc): 51,000 cd/distance •MAC 2000 Wash in 2-unit flight case: P/N 90203000•MAC 2000 Wash in single flight case: P/N 90203010 •MAC 2000 Wash, white in single flight case: P/N 90203020

Thermal

•Maximum ambient temperature (Ta): 40°C (104°F)•Maximum surface temperature: 140°C (284°F)•Total heat dissipation: ca. 5120 Btu/hr
2 (m or ft)•Zoom narrow: beam angle 85°Illuminance (lux or fc): 35,000 cd/distance
2 (m or ft)•Zoom wide: beam angle 105°Illuminance (lux or fc): 35,000 cd/distance

Photometrics (Standard)

2 (m or ft)•Measurement source: Osram HMI 1200 W/S •Measurement conditions: Standard Fresnel lens, 50 mm aperture ring(A range of aperture rings are included that enable narrower beam angles - 30 mm (1.2 in), 40 mm (1.6 in), 45 mm (1.8 in), and the standard 50 mm (2 in))•Hyper mode: beam angle 12°Illuminance (lux or fc): 1,750,000 cd/distance

Description

The MAC 2000 Wash is a 1200 Watt movinghead wash light that provides CMY colormixing, color correction (CTC), two color wheels, each with four removable colors, a combined dimmer/shutter, a zoom with a range of 10°to 73°(subject to the type of lens fitted), 540°of pan, and 267°of tilt. The MAC2000 Wash is fitted with anelectronic ballast that provides flicker-free operation and an economic power-savingmode. It also has a switch mode powersupply allowing it to 'auto sense' and automatically adjusts to the local electrical power. The MAC 2000 Wash has a Fresnel lens mounted as standard, and is also supplied with a PC lens and a super-wide- angle lens.

Control & Programming

•Protocol: USITT DMX-512•Control channels: 19 or 21•Receiver: Opto-isolated RS-485 •Data I/O: locking 3-pin & 5-pin XLR, pin 1 shield, pin 2 cold (-), pin 3 hot (+)•Setting and addressing: LED control panel, remote w/ MP-2 uploader•Pan/tilt resolution: 8- or 16-bit •Movement control: tracking and vector •Home software installation: serial upload (MUF)
2 (m or ft)•Zoom narrow: beam angle 18°Illuminance (lux or fc): 1,000,000 cd/distance

Included items

2 •2 x Omega bracket, 1/4-turn•User manual •Aperture rings: 30 mm (1.2 in), 40 mm (1.6 in), 45 mm (1.8 in), and 50 mm (2 in - fitted as standard)•Super-wide-angle lens•PC lens •Fresnel lens •XLR cable (m or ft)•Zoom wide: beam angle 44°Illuminance (lux or fc): 200,000 cd/distance
2 (m or ft)•Measurement source: Osram HMI 1200 W/S

Electromechanical effects

•Cyan: 0 - 100% •Magenta: 0 - 100%•Yellow: 0 - 100%•Color correction: 0 - 178 mireds •Color wheels (x2): Each with 4 removable filter positions and an open position•Motorized zoom (see photometrics sections for zoom ranges)•Dimmer/shutter: full range dimming and variable speed flash•Pan: 540° •Tilt: 267°

Accessories Physical

•MP-2 Uploader: P/N 90758420 •G-clamp: P/N 91602003 •Half-coupler clamp: P/N 91602005•The Wife DMX Tester: P/N 91611038•Barndoor system: P/N 91611059 •Length: 408 mm (16.0 in)•Width: 490 mm (19.3 in•Height: 750 mm (29.5 in) •Weight: 34 kg (74.8 lbs)

Source

•Lamp manufacturer: 1200 W short arc discharge •Base: Double-ended SFc 10-4 with key•Approved models: Osram HMI 1200 W/S short-arc•Control: automatic and remote on/off, hot re-strike•Ballast: Electronic

Design standards Photometrics (Optional)

•EU EMC: EN 50 081-1, EN 50 082-1•EU safety: EN 60598-1, EN 60598-2-17•Canadian safety: CSA C22.2 No. 166 •US safety: ANSI/UL 157 •Measurement conditions: PC lens, 50 mmaperture ring (A range of aperture rings

Maximum power and current

are included that enable narrower beam angles - 30 mm (1.2 in), 40 mm (1.6 in),

Electronic ballast

VoltHzWattAmp100 V 50 Hz1530 W20.9 A 100 V 60 Hz1570 W20.9 A 120 V 50 Hz1520 W18.0 A120 V 60 Hz1520 W17.7 A208 V 50 Hz1450 W10.4 A 208 V 60 Hz1450 W10.2 A 230 V 50 Hz1450 W9.5 A 230 V 60 Hz1460 W9.4 A250 V 50 Hz1450 W8.8 A250 V 60 Hz1460 W8.6 A

Installation

45 mm (1.8 in), and the standard 50 mm (2 in) •Minimum distance to combustible materials: 1 m (39 in)•Minimum distance to illuminated surfaces: 3 m (10 ft)•Minimum distance around modern fans and vents:0.1 m (4 in)•Orientation: any •Hyper mode: beam angle 13°Illuminance (lux or fc):1,900,000 cd/distance

Construction

•Housing: UV-resistant fiber-reinforced composite•Colors: black, white•Protection factor: IP 20
2 (m or ft)•Zoom narrow: beam angle 14°Illuminance (lux or fc): 1,280,000 cd/distance
2 (m or ft)•Zoom wide: beam angle 35°Illuminance (lux or fc): 285,000 cd/distance

Installation Details

2 (m or ft)•Measurement source: Osram HMI 1200 W/S •Mounting points: 8 pairs of 1/4-turn modern locks,offset 45°•Orientation: any
©May 2003 Martin Professional A/SSpecifications are subject to change without notice

Martin Professional A/S • Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • Internet: www.martin.com