MAJESTIC WETROOMS PRODUCT GUIDE
20Pages

{{requestButtons}}

Catalog excerpts

MAJESTIC WETROOMS PRODUCT GUIDE - 1

majestic wetrooms product guide

Open the catalog to page 1
MAJESTIC WETROOMS PRODUCT GUIDE - 2

INLINE TIMBER FOURWAY TIMBER SOLID FLOOR

Open the catalog to page 2
MAJESTIC WETROOMS PRODUCT GUIDE - 3

Majestic Wetrooms Inline Timber Timber Floors The Inline Timber pre-formed shower base has been developed specifically to allow the installation of a wetroom on a timber floor. Available in a range of sizes, the former has a built-in gradient ensuring that water from the shower is directed towards the integral linear drain, giving a sleek and stylish finish. The key feature of the Inline Timber is its two-way fall which allows the tiling to be laid without diagonal cuts, therefore making it ideal for use with large format tiles. The integrated linear drain can be fitted with one or two...

Open the catalog to page 3
MAJESTIC WETROOMS PRODUCT GUIDE - 4

Majestic Wetrooms Former The Inline Timber floor former is manufactured using a high-density XPS foam with a mineral coating on both sides, making them both lightweight and easy to handle, whilst maintaining good thermal properties and compressive strength. The former has a pre-formed 12mm fall, providing a consistent two-way gradient every time. The clever design allows for far higher flow rates than a more traditional four-way fall former whilst the linear drain makes it ideal for the installation of large format tiles. Each Inline Timber former is supplied with a stainless steel trim for...

Open the catalog to page 4
MAJESTIC WETROOMS PRODUCT GUIDE - 5

Majestic Wetrooms Grill Finish The grill is available in three different finishes. MG1 All are manufactured in 316 marine grade stainless steel, ensuring a stunning high quality finish and supplied 600mm long. Type MG1 Oblong slots: MG1 Rows of oblong slots in a grained stainless steel finish. Type ST1 & ST2 - Stone-infill: Allows a section of tile to be inserted to provide a sleek continuous look with a minimal stainless steel frame around the tile. ST1 Suitable for 10-12mm stone / porcelain tiles ST2 Suitable for stone up to 20mm thick Type FL1 - Frameless Infill A similar solution to our...

Open the catalog to page 5
MAJESTIC WETROOMS PRODUCT GUIDE - 6

Code Price Code Price Code Price Code Price Code Price Code Price Code Price Item Additional Trap Code ITFTRAP

Open the catalog to page 6
MAJESTIC WETROOMS PRODUCT GUIDE - 7

Majestic Wetrooms Fourway Timber Timber Floors The Fourway Timber is a pre-formed shower base developed specifically to allow the installation of a wetroom onto a timber floor. Available in a range of sizes, the Fourway Timber has a built-in gradient ensuring that water from the shower is directed towards the drain outlet. The Fourway Timber has a built-in four-way fall which provides a consistent gradient, making it ideal for use with mosaic tiles. Each Fourway Timber is supplied with our height adjustable shower drain which is available in a choice of stylish finishes. Key Features:...

Open the catalog to page 7
MAJESTIC WETROOMS PRODUCT GUIDE - 8

Majestic Wetrooms Former The Fourway Timber is manufactured using a high-density XPS foam with a mineral coating on both sides, making them both lightweight and easy to handle, whilst maintaining good thermal properties and compressive strength. The four-way fall provides a consistent gradient of approximately 12mm to the drain, making it ideal for the installation of mosaic tiles, but also suited to large format tiles cut and layed in an 'envelope' effect. Waste The trap has an adjustable ball joint for ease of installation and comes with removable dip-tube. The trap is located within...

Open the catalog to page 8
MAJESTIC WETROOMS PRODUCT GUIDE - 9

Majestic Wetrooms Grill Finish The grill is available in two different finishes. All are manufactured in 316 marine grade stainless steel, ensuring a stunning high quality finish. Type MG1 - Oblong slots: Rows of oblong slots in a grained stainless steel finish. Type ST1 - Stone-infill: Allows a section of tile to be inserted to provide a sleek continuous look with a minimal stainless steel frame around the tile. Suitable for 10-12mm stone/porcelain tiles. Bespoke depths available to order. Height Adjustment The grill is height adjustable in 1mm increments to suit tile thicknesses of 6mm to...

Open the catalog to page 9
MAJESTIC WETROOMS PRODUCT GUIDE - 10

Code Price Code Price Code Price Code Price Code Price Code Price Code Price Code Price

Open the catalog to page 10
MAJESTIC WETROOMS PRODUCT GUIDE - 11

Majestic Wetrooms Solid Floor Drains The Inline Solid Floor Drain has been developed specifically for concrete or screed floors and can be used on concrete slabs, planks and block and beam floors. The key feature of the Solid Floor Drain is its height -the total height from the base to the top of the trough being only 55mm, making it perfect for today's modern construction methods. The drain incorporates a unique waterless trap which has a lifetime guarantee and has been granted BBA approval. It is available with one or two traps and a choice of stylish grill finishes. Key Features: •...

Open the catalog to page 11
MAJESTIC WETROOMS PRODUCT GUIDE - 12

Majestic Wetrooms Waterless Trap The waterless trap has been specially designed with a spring loaded mechanism which keeps the trap sealed when not in use. This ensures that even when left unused for prolonged periods the trap cannot dry out, making it ideal for situations where the shower is not in everyday use. The smart design of the linear trough allows the waste position to be rotated through 360° enabling installation in most scenarios with ease. • BBA approved • 360° rotatable waste position • Easy to clean and replace trap • No requirement to top up the trap during long...

Open the catalog to page 12
MAJESTIC WETROOMS PRODUCT GUIDE - 13

Majestic Wetrooms Grill Length All Inline Floor Drains are supplied with a 660mm drain body/trough. All lengths of grill are then fitted onto this trough. The MG1 grill is available in four standard sizes: • 600mm The ST1, ST2 and FL1 grills are available in 15 lengths up to 2000mm. The drain body/trough is always installed first prior to the application of the waterproofing membrane, with the grill installed at the point of tiling. Regardless of the length of the grill, the drain body always remains the same at 660mm. Where the grill length exceeds 660mm the ends of the grill overhang...

Open the catalog to page 13
MAJESTIC WETROOMS PRODUCT GUIDE - 14

Majestic Wetrooms Grill Type - Wall or Floor There are two types of grill available with the solid floor drain, both fit onto the drain body using 8 pre-set fixing points. Both of the Floor Grill and Wall Grill are independently height adjustable, enabling the grill to be positioned precisely to suit the tile thickness being used. The final position of the Wall Grill is also independently width adjustable by up to 38mm, allowing the grill to be neatly positioned up against the wall tile, after the drain body has been installed, for a perfect finish every time. Floor Grill Wall Grill The...

Open the catalog to page 14

All Majesctic Showers catalogs and technical brochures

  1. Shower Trays

    4 Pages