• Products
  • Catalogues
  • Projects
  • News & Trends
  • Exhibitions

ABA - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

(Standby Re-bars) Stainless or normal BE Concept Reinforcement made out of a high tensile steel re-bar partially sleeved ; the non-sleeved part length depends on needed overlap with the new structure reinforcement to be linked to the existing one ; Fabric sleeve wraps only part of anchor . Single injection pipe. Applications This type of anchor allows the binding of new structures : - beams , - slabs , - prefabricated slab elements , - structural elements, - construction additions , to existing structures  : - cast in place basement walls, - concrete walls, - existing masonry walls The sleeved part of the anchor is embedded in the existing structure while the other part stands by to be cast in the new construction , overlapping the new reinforcement of the slab, beam... The ABA garanties a perfect anchoring of the reinforcement of the new structure on the existing bearing element thanks to the good quality bonding between grout / re-bar and existing. masonry . Although the quality of the existing structure is to be accounted for the transfer of loads , the stresses will be mostly determined by the re-bar diameter and the quality of the used steel . Steel Anchors

 Open the catalogue to page 1

Advantages The ABA secures an optimal bonding in any support material , no matter its nature or shape. The principal advantage is to be able to provide the anchor with a large diameter sleeve and so get a high anchorage in an easy and cheap way by creating a large interface surface. The ABA can anchor large charges if pipes are used to replace the re-bars. Investigations An engineering office will determine the loads to be transfered and the anchor lengthes , diameters and locations . The existing structure shall be investigated to understand its capacity of bearing the new loads . This shall...

 Open the catalogue to page 2

All M-TECH Patrimonium SA catalogues and technical brochures

  1. PIS

    4 Pages

    En
  2. PCCH

    4 Pages

    En
  3. ADC

    3 Pages

    En
  4. AP

    2 Pages

    En
  5. AGL

    2 Pages

    En
  6. ARL

    3 Pages

    En
  7. AER

    2 Pages

    En
  8. AAT

    3 Pages

    En
  9. APL

    2 Pages

    En
  10. AMC

    3 Pages

    En
  11. AM 2000

    4 Pages

    En
  12. Piles

    2 Pages

    En
  13. Steel anchors

    3 Pages

    En