IMPACT
3Pages

IMPACT® ISL-ALED RECESSED LUMINAIRE F Retention Torsion spring clips secure fitting into back box, mounting plate or appropriately sized cut-out. G Locking Specify "-L" to include tamper resistant discreetly hidden set screw. Required for IP65 wet location applications. A General Regressed LED with rectangular aperture for glare-free, energy efficient, path and step lighting; suitable for dry or wet, interior or exterior applications. B Special Features Dimmable 3W AC LED (dimming by power supply); LED/heat sink module is field replaceable. C Effects Devices Provided with sealed polycarbonate linear diffusion lens; consult factory for availability of color gels which may achieve custom color tempera -tures. D Installation Guidelines Optimum 18" (457mm) above walking surface; 36" (914mm) on-center. E Gasket Foam gasket provided. Required for IP65 wet location applications only. CONSTRUCTION Cast 316 stainless steel or bronze depending on finish. ELECTRICAL Luminaire requires factory supplied 12-volt AC power supply. May be integral to back box or remote. Secondary run lengths vary depending on power supply specified. See page 3 for available options and wiring requirements. MOUNTING See pages 2 & 3 for various mounting accessories. LED Proprietary 3 watt nominal AC LED, 80+ CRI, 2 SDCM, in color temperatures of 2700K, 3000K, 3500K & 4000K, plus Blue and Amber, 42.8 delivered lumens (13.4 lm/watt). Average rated life of 50,000+ hours. LISTING TUV listed for dry/damp (IP54 rated) and wet locations (IP65 rated); CE marked; Dark-Sky approved; Patent No. US D610,734 S. WARRANTY Five year warranty on LED lamp module and driver. One year warranty on all other Lucifer Lighting provided system components. Consult website for full warranty terms and conditions. ORDERING INFORMATION (Luminaire) ©2016 Lucifer Lighting Company As part of its policy of continuous research and product development, the company reserves the right to change or withdraw specifications without prior notice.

IMPACT® ISL-ALED RECESSED LUMINAIRE DESCRIPTION Following mounting options require remote power supply SUITABLE FOR USE IN DRY LOCATIONS ONLY SSL-SC6 SSL-SC3 ¨ SSL-SC3 Stainless steel stud mount collar for dry locations only. Adjusts with integral jackscrew from 1/2” to 3” for walls with varying substrate depths (rock, brick and stone). Features 1/2” knockouts for wiring. ¨ SSL-SC6 3.5” (90m Stainless steel stud mount collar for dry locations only. m) Adjusts with integral jackscrew from 3” to 6” for walls with varying substrate depths (rock, brick and stone). Features 1/2” knockouts for...

POWER SUPPLY OPTIONS ¨ PSA-60-12P-1 Plug-in Class II power supply, 120V primary, 12V secondary, 60W electronic transformer (non-dimmable). Accommodates up to 8 luminaires wired in either a homerun or parallel method. Max 40’ secondary run length. ¨ PSA-60-12H-JB-1 Dimmable power supply for hardwire applications. Consists of a steel compartment painted black with integral conventional Class II 120V primary, 12V secondary, 60W electronic transformer and lid. Accommodates up to 8 luminaires wired in either a homerun or parallel method. Max 40’ secondary run length. ¨ PS-50-12AC-230E 230V ±10%...