Aquiwood concept

TECHNICAL SSHEET AQUIWOOD®

2 Aquiwood®kits*:KIT 1.43m : Slat H = 1m43 : 45 + 1 vertical slats + 6 horizontalslatsKIT 1.73m : Slat H = 1m73 : 45 + 1 vertical slats + 6 horizontalslatseKIT 1.93m : Slat H = 1m93 : 45 + 1 vertical slats + 6 horizontalslats

Description

* Fixing system not supplied –choice between screws, nails or staples Vertical and horizontal slats are manufactured from category 3 autoclaved spruce pine, in compliance with French standard NF B 50-105-3, and benefit from anti-termite and anti-fungal treatments

Treatment Resistance

As long as the Atlantis steel posts are correctly installed in normal conditions, Aquiwood®will withstand winds of up to 124km/h (75mph) for a panel heights of up to 2 metres Atlantis 21 components are guaranteed for 2000 hours (as successfully tested in a salt spray environment). This represents about 15 years for sites which arelocated more than 500m from the sea and in normal weather conditions. The Aquiwood®boards are protected against deterioration for 10 years

Guarantee

1 2

Polyamide cap

3

WOOD BOARD : width 48mm,thickness 7mm Clips BATTEN : length 2m50, triangular base 14mm deep, 28mm wide

OPTIONS

-A wide range of Modulis®gates furniture are eavailable to complete your fencee-The Atlantis 21 system and its eaccessories are available in green and ewhite as standard(over 200 other RAL colours available on request).e1. Lay the horizontal battens in the folds of the Atlantis 21 panele2. Locate the two end vertical boards and fix to the battens using screws, nails or staples (not supplied).e3. Locate and fix intermediate vertical boards.

INSTALLATION

Distributed by : LIPPI HEAD OFFICE
La Fouillouse –16440 Mouthiers–sur-Boëme eFRANCEeTel. 33 5 45 67 96 83 –Fax : 33 5 45 67 83 71 LIPPI keep the right to modify the product without being obligedto make changes on the products already delivered or ordered -Last updating 22/06/2007