CH Auto Changeover
According to the height of the ceiling, RPM of
fan furniture motor isselectable to increase air reaching distance. With
design heat pump model,Cooling and heating operation is changed automatically on the base of setting temp.
• Initial Setting Temp:18ºC:(Memory the final setting temp) • Control of setting temp.-Wired Remoted Controller:18~30ºC
-Reset Button in indoor unit: finally memorized temp.
-Wireless Remoted Controller: 23~27ºC
GeneralHigh Ceiling 23.0 122.7101122334(M)4
+2… C +1 Inside Temp …C +0.5…C
Setting emp.
-0.5…C
-1…C -2…C Air Velocity Distribution COMP on off on off off on off on off on offIndoor FAN Setting -Low Setting -Low Stop Setting Low/ Setting Low/ Setting Low Stop StopCYCLE Low Noise with 3-Dimensional Turbo Fan
Cooling Heating Cooling The most advanced low-noise
design design.The adoption of turbo-fan and round type.
design heat exchanger give the
quietest operation.
1.5m Auto Restart Function
3637403128 5m In the event of sudden power failure, the auto start mechanismwill restore the A/C to its previous setting when power returns. Noise output measured in anechoic test room
Optimal Air Distribution
• Optimal air distribution with 4-way direcitional Air flow system.• 4-way Auto
Swing furniture Zero power consumption use in standby mode by adopting SMPS
(Swiching Mode Power Supply) • Power waste due to standby power- Power is wasted if a plug is connected to an outlet even though the appliance is turned off.• Development of super power-saving SMPS(Swiching Mode Power Supply)- Zero standby power by reducing 90% of standby power.
- No need to pull out every plug when appliance is not in use.
This function prevents children or others from tampering with thecontrol buttons on the unit. It is then controlled by the remote
controller.
- All the buttons on indoor
design display panel will be locked.
-The unit will be controlled only by remote controller.
Ceiling Cassette Type 29