MultiBase U20
7Pages

Page 1 Section Dimensions Car data PRODUCT DATA cc baseu20 eb 2000 kg 1 / 2600 kg 2 Dimensions Page 3 Approach Load plan Page 6 Tec. data To be performed by the customer All space requirements are minimum finished dimensions. Tolerances for space requirements+0. ^ Dimensions in cm. EB (single platform) = 2 + 1 vehicles Suitable for Standard passenger cars: Limousine, station wagon, SUV, van according to clearance and maximal surface load. weight max. 2000 kg max. 2600 kg wheel load max. 500 kg max. 650 kg Clearance profile <1 Standard type <2 Special system: maximum load for extra charge. <3 To follow the minimum finished dimensions, make sure to consider the tolerances according to VOB, part C (DIN 18330 and 18331) and the DIN 18202. (4 Car width for platform width 230 cm. If wider platforms are used it is also possible to park wider cars. <5 Potential equalization from foundation grounding connection to system (provided by the customer). <6 Slope with drainage channel and sump see page 3. <7 In compliance with DIN EN 14010, 10 cm wide yellow-black markings compliant to ISO 3864 must be applied by the customer to the edge of the pit in the entry area to mark the danger zone (see „load plan“ page 4). <8 At the transition section between pit floor and walls no hollow mouldings/coves are possible. If hollow mouldings/coves are required, the systems must be designed smaller or the pits accordingly wider. <9 If necessary, protective gratings are installed at the back area 10 The upper platform is a frame construction. Flooring can be provided by the customer (e.g. soil/turf, sandbed/turfblock, sandbed/marble, etc.). Maximum weight of customer coating 250 kg/m2. The upper platform is at ground level and is traversible when in lowered position (vehicle load: 2600 kg maximum, wheel load: 650 kg maximum). On special conditions the upper platform may be used as parking space. 11 A separate maintenance manhole must be installed by the customer (with manhole cover, ladder and a connecting passage to the pit). A save maintenance access with a door has to be provided by the customer - please contact KLAUS Multiparking. The hydraulic power unit and ventilation system are also housed in the maintenance manhole O After operation, the system must always be run into the lowest final position (key interlock). MultiBase U20 EB I Code number 588.51.740-002 I Version 03.2018

MultiBase U20 EB | Code number 588.51.740-002 | Version 03.2018 Width dimensions Top view closed pit Width dimensions Page 3 Approach Load plan Shaft covering (performed by the customer) Serial system (with dividing walls) 2 x single platform (without dividing wall) Cutting through Technical data 0,00 Top edge finished floor Usable platform width parking levels 230 240 250 260 270 0,00 Top edge finished floor 0,00 Top edge finished floor Door (performed by the customer) Electrical installation Usable platform width top platform 270 280 290 300 310 Usable platform width parking levels 2 x...

MultiBase U20 EB I Code number 588.51.740-002 I Version 03.2018 Page 1 Section Dimensions Car data Approach Page 2 Width dimensions Page 3 Approach Load plan Page 6 Tec. data To be performed by the customer OThe illustrated maximum approach angles must not be exceeded. Incorrect approach angles will cause serious maneouvring & positioning problems on the parking system for which the local agency of KLAUS Multiparking accepts no responsibility. Load plan Section U20 EB Upper platform with sheet metal plates Upper platform with stone layer usable platform width F1 F2 15 usable...

MultiBase U20 EB | Code number 588.51.740-002 | Version 03.2018 Circular drainage channel Width dimensions Page 3 Approach Load plan Base plate Base plate Base plate Base plate Technical data Electrical installation On-site coating of the uppermost platform Maximum weight of customer coating 250 kg/m2. Coating with asphalt or concrete Coating with paving stones or turf grids Paving stones or turf grids

Width dimensions Page 3 Approach Load plan MultiBase U20 EB | Code number 588.51.740-002 | Version 03.2018 Electrical installation Installation diagram Electrical data (to be performed by the customer) Electrical installation Supply line (3 PH + N + PE) with marked wire and protective conductor: 5 x 4 mm2 Separate supply line (230 V) with lighting and power outlet Foundation earth connector from supply line into the shaft Equipotential bonding in accordance with DIN EN 60204 from foundation earth connector to the system Empty pipe DN 40 with taut wire base pit to operating device Empty pipe...

Width dimensions Page 3 Approach Load plan Page 4 Pit Electrical installation Technical data To be performed by the customer Page 7 MultiBase U20 EB | Code number 588.51.740-002 | Version 03.2018 Technical data Sound insulation According to DIN 4109 (Sound insulation in buildings), para. 4, annotation 4, KLAUS Multiparkers are part of the building services (garage systems). Normal sound insulation: DIN 4109, para. 4, Sound insulation against noises from building services. Table 4 in para. 4.1 contains the permissible sound level values emitted from building services for personal living and...

Width dimensions Page 3 Approach Load plan Page 4 Pit Electrical installation Technical data To be performed by the customer Page 7 MultiBase U20 EB | Code number 588.51.740-002 | Version 03.2018 Description Single platform (EB) General description: Multiparking system providing independent parking spaces for 2 cars (EB) one on top of the other each. On special conditions the upper platform may be used as parking space. Dimensions are in accordance with the underlying dimensions of parking pit, height and width. The parking bays are accessed horinzotally (installation deviation ± 1 %)....