|
Flat Design Catalogue - 21 Pages
Description Ref.-no.
Standard push-button module
The device has to be extended with the desired cover for push-button module.
It can be mounted onto the flush-mounted radio transmitter (Radio Management)
or the bus coupling unit (KNX).
The standard push-button is available for 1-gang up to 4-gang modules.
A push-button sensor cover is „divided“ into an upper and a lower half, each
controlling a function such as switching, dimming, shutter, value transmitter,
recalling and storing of light-scenes. Each cover is assigned to a red status LED.
A blue operation LED can serve as an orientation light.
1-gang 2071 TSM
2-gang 2072 TSM
3-gang 2073 TSM
4-gang 2074 TSM
In connection with the KNX system, the functionality of this device depends
on software. Detailed information on loadable software and attainable functionality
as well as the software itself can be obtained from the manufacturer’s product database.
An updated version of the product database and the technical descriptions are
available in the Internet at www.jung.de.
Bus coupling unit 2070 U
with supporting frame.
ETS product family: System components
The bus coupling unit enables application modules
to be connected to the KNX system.
Flush-mounted radio transmitter 40 FW
Installation into standard wall box or with surface cap.
The wall-mounted transmitter is operated in combination with standard
push-button module (1-gang, 2-gang, 3-gang or 4-gang).
After the standard push-button is pressed, the transmitter sends a radio telegram
which is understood and evaluated by all the receivers of the Radio Management
system. Possible modes: on/off, dimming, light scene, central off .
The number of radio channels available depends on the used standard push-button.
Flat Design
18
-
P. 1
-
P. 6
The benefits of the new KNX switch sensormodule with illuminated labelling field onlybecome really clear when it grows dark. Evenin poor lighting conditions,... -
P. 7
PERFECTLY COMBINED – INNOVATION AND CONVENTION IN ONE LINEThe supplied retaining ringmakes it possible: Using thisintelligent design idea, the newKNX... -
P. 8
For the organization of completeinstallations in a uniform appearance,the frames of the LS Designare ideally suitable. The assemblingof conventional switches,dimmer... -
P. 9
MAXIMUM FLEXIBILITY DUE TO MODULAR DESIGNBus coupling unit Flush-mounted radio transmitterStandardpush-button module1-gangCover forpush-button module1-gangPush-button... -
P. 10
Standardpush-button module1-gangCover forpush-button module1-gangUniversal switchsensor module,2-gangUniversal switchsensor module,1-gangUniversal switchsensor... -
P. 11
-
P. 12
Description Ref.-no.Standard push-button module with integrated BCUThe device has to be extended with the desired cover forpush-button module.The standard... -
P. 13
Description Ref.-no.Universal push-button module with integrated BCUThe device has to be extended with the desired cover forpush-button module.The universal... -
P. 14
Description Ref.-no.FD Room Controller Display (FD RCD)The FD room controller display is available in various coloursor metal versions. When you order... -
P. 15
24 V DC80 mAL1L2L3NA1 A2 A3 A4 A5 A6 A7 A8A1 E1 A2 E2 A3 E3 A4 E4 A5 E5 A6 E6 A7 E7 A8 E8A1 A2 A3 A4 A5 A6 A7 A8- + L NDescription Ref.-no.Push-button... -
P. 16
Description Ref.-No.Cover for push-button moduleto clip on push-button module 1-gangivory FD 901 TSAwhite FD 901 TSA WWlight grey FD 901 TSA LGMetal versionsstainless... -
P. 17
-
P. 18
-
P. 19
-
P. 20
