INGEREV CITY
2Pages

{{requestButtons}}

Catalog excerpts

INGEREV CITY - 1

CITY THE URBAN CHARGING STATION Ground / Wall The INGEREV® CITY product line features an attractive design that blends easily with the street furniture, whilst its vandal-proof and weatherproof rating means that it is suitable for indoor and outdoor installation. The INGEREV® CITY charging station models are equipped with a power outlet that is compliant with the IEC 62196-2 standard, permitting vehicle recharging in mode 3 of the IEC 61851 international standard, for a guaranteed safe charging process. Furthermore, all the models in the INGEREV® CITY range are fitted with an additional power outlet for charging in modes 1 and 2. INGEREV® CITY offers two different possibilities, depending on the type of installation: Ground “G”: for use in public places. Wall “W”: for mounting on garage or car park walls. Available in either a single phase or three phase version, with a maximum current of up to 32 Amps per phase, up to a maximum power output of 22 kW. This makes the charging process as much as 6 times quicker than through a domestic socket, achieving charging times of less than 2 hours for most vehicles. The INGEREV® CITY charging stations are equipped with a cable retention and locking system to prevent removal by unauthorised users. In the event of a power failure, the INGEREV® CITY charging stations have a minimum autonomy of one hour, guaranteeing cable retention during this time, until new user identification. Each INGEREV® CITY is enabled for remote communication with a control centre, offering the possibility of monitoring demand and setting charging rates, either through Ingeteam’s proprietary software or integration in third party control centres. Each INGEREV® CITY charging station has the following basic functionality: Vehicle charging modes 1, 2 and 3 of standard 61851. Local identification by an RFID contactless access card. Measurement of the power output and the energy transferred with a MID approved meter. Unauthorised user access restriction. Operating autonomy in the event of a power failure. LED status indicators. Multi-lingual LCD Display with customisable text Power output adjustment. Communication with other charging stations and with a Control Centre. Equipment customizable depending on the quantity ordered. Optional remote management and monitoring of each station. Compatible with the OCPP protocol through the use of Webservices (SOA). Possibility of programming for deferred charging. Anti-graffiti paint. COULEUR www.ingeteam.com electricmobility.energy@ingeteam.com

Open the catalog to page 1
INGEREV CITY - 2

Ground / Wall INGEREV© CITY Ground INGEREV© CITY Wall Charging modes IEC 61851 Mode 1 and 2 Mode 3 Type of installation Supply Single phase 230 V / 50 Hz (2P+T) 3 phase 400 V / 50 Hz (3P+N+T) Maximum current Socket outlets Schuko CEE 7/4 Type E/F(1) IEC 62196-2 Type 2(1) IEC 62196-2 Type 3A(1) IEC 62196-2 Type 3C(1) Maximum power output Operating temperature Relative humidity General information Over-current protection Thermal magnetic switch with automatic re-set (optional)(1) Differential current protection 30 mA Class A with automatic re-set (optional)(1) Over-voltage protection Energy...

Open the catalog to page 2

All Ingeteam catalogs and technical brochures

  1. INGESYS™ IC2

    74 Pages

  2. INGECON SUN

    2 Pages