INGECON SUN PowerMax B 1000V series - Indoor/Outdoor
4Pages

Maximum power density These PV central inverters feature more power per cubic foot. Thanks to the use of highquality components, this inverter series performs at the highest possible level. Latest generation electronics The B Series inverters integrate an innovative control unit that runs faster and performs a more efficient and sophisticated inverter control, as it uses a last-generation digital signal processor. Furthermore, the hardware of the control unit allows some more accurate measurements and very reliable protections. These inverters feature a low voltage ridethrough capability and also a lower power consumption thanks to a more efficient power supply electronic board. Integrated DC and AC connections The input and output connections are integrated into the same cabinet, facilitating connection, maintenance and repair work. Maximum protection These three phase inverters are equipped with a motorized DC switch to decouple the PV generator from the inverter. Optionally, these inverters can be supplied with an AC circuit breaker with door control, in addition to fuses, grounding kit and input current monitoring. Maximum efficiency values Through the use of innovative electro-nic conversion topologies, efficiency values of up to 98.9% can be achieved. Thanks to a sophisticated control algorithm, this equipment can guarantee maximum efficiency depending on the PV power available. A complete range of equipment for all types of projects Versions available: Indoor inverters with integrated DCAC cabinet. Outdoor inverters with integrated DCAC cabinet. Symmetrical indoor inverters, with the connection cabinet on the opposite side, to make it possible to install two inverters facing each other, with a common power supply point. Enhanced functionality This new INGECON® SUN PowerMax range features a revamped, improved enclosure which, together with its innovative air cooling system, makes it possible to increase the ambient operating temperature to deliver its rated power up to 50 ºC. www.ingeteam.com solar.energy@ingeteam.com

830TL B300 / 1000TL B360 / 1070TL B385 / 1110TL B400 / 1140TL B410 / 1165TL B420 Long-lasting design The inverters have been designed to guarantee a long life expectancy, as demonstrated by the stress tests they are subjected to. Standard 5 year warranty, extendable for up to 25 years. Ease of maintenance All the elements can be removed or replaced directly from the inverter’s front side, thanks to its new design. Monitoring and communication Ethernet communications supplied as standard. The following applications are included at no extra cost: INGECON® SUN Manager, INGECON® SUN Monitor and...

Notes: (1) Depending on the type of installation and geographical location. Data for STC conditions (2) Vmpp.min is for rated conditions (Vac=1 p.u. and Power Fac-tor=1) (3) Consider the voltage increase of the 'Voc' at low temperatures (4) For each °C of increase between 30 °C and 50 °C, the output power will be reduced at the rate of 0.53%. Over 50 °C, the output power will be reduced at the rate of 1.8% / °C (5) For Pout>25% of the rated power (5) For Pout>25% of the rated power and voltage in accordance with IEC 51000-3-4 (7) Consumption from PV field when there is PV power available...

STC conditions 1 Vmpp.min is for rated conditions (Vac=1 p.u. and Power Fac- tor=1) 2 Consider the voltage increase of the 'Voc' at low temperatures 3 For each °C of increase between 35 °C and 50 °C, the output power will be reduced at the rate of 0.53%. Over 50 °C, the output power will be reduced at the rate of 1.8% / °C For Pout>25% of the rated power 6 For Pout>25% of the rated power and voltage in available 7 Over 1,000 m temperature for rated power is reduced at the rate of 4.5 °C accordance with IEC 61000-3-4 5 Consumption from PV field when there is PV power for each 1,000 m. For...