| Description Device devised to obtain precise regulation; receives orders only via the BUS. When these devices receive orders directly from the BUS, they can be controlled with conventional push-buttons (using MECing), remote control, touch building screens or pcs onsite. They can also be controlled remotely using telephones or mobiles and guided via voice menus, or graphically via PDAs or the Internet. Up to 15 character chains can be admitted from the Development System with which to name and identify each output. Technical Characteristics Applicable power supplies depending on the load* • Incandescent or halogen loads 220V............................................................300W • Low Voltage loads with a conventional transformer incorporated..................... 200W • Low Voltage loads with a electronic transformer incorporated..........................100W *Estimated power calculated with the losses of each type of lighting. |