all or nothing actuators

4E4S

[ 4E4S · 4E4S-W ] 4 digital inputs and 4 digital outputs 10A Actuator

To control 4 electrical loads or 2 blinds/curtains.

• 4 Low Voltage (SELV) digital inputs referred to the BUS phase.• 4 Digital Outputs to Relay,potential-free. • Integrated power source.Can give 150mA power to other BUS devices. • Cut off capacity of the output relays,10A at 250Va.c. • Remembers last position when there are power cuts. • Programmable inputs to work with switches or push-buttons. • 2 programmable BUS events for each input. • DIN-Rail mounted,4 modules or in a distribution box,70mm depth. • Available with wireless BUSing®.Ref: 4E4S-W
NL ~ Z1Z2Z3Z4 4E4S actuadoractuator ingenium www.ingeniumsl.com Ref. IN 1IN 2IN 3 IN 4 +12V AB Ref.

Description

Actuator composed of 4 outputs to a potential-free relay. It has a cut-off capacity of 10A per output and 4 low voltage in-puts referred to the BUS Reference.Up to 15 character chains can be admitted from the Development System with which to name and identify each outputand input. The operational mode can also be selected in each input (Push-button,Switch or Curtains mode),and two BUS events for each input (one activation event and one deactivation event). This enables the user to act upon any ele- ment of the installation from the device inputs. Inputs • Deactivated: relay open• Activated: relay closed. • Maximum commutation current,10A. • Low voltage 5V inputs,minimum activation current,5mA• Active when connected to Reference. • Distance of maximum cable to switch or push-button,30m. • Configurable hardware and garden software filter from the Development System. Outputs

Technical Characteristics

Supply Voltague Max.Powerabsorbed GivenCurrent (+12V) Current consumedwithout connection Num.Outputs* Cut-off capacityof each output 230Va.c. 2.8VA 150mA 150mA (230Va.c) 4 10A
*Potential-free outputs.

12