Catalogs >
IMPA Contemporary ideas >
Technical Data Sheet - 0401 IMPASTUK UNIVERSAL EXTRA

Technical Data Sheet - 0401 IMPASTUK UNIVERSAL EXTRA
1Pages

Catalog excerpts

Technical Data Sheet - 0401 IMPASTUK UNIVERSAL EXTRA - 1

IMPASTUK UNIVERSAL EXTRA Putty paste, quick drying 30/11/07 Product description Ready-to-use putty paste, easy to apply, offering quick drying and excellent sandability. Suitable for levelling and smoothing indoors on wood, walls and plasterboard. Technical data Colour Binder Specific gravity Practical cover rate∗ Storage life NB: Data recorded @ 20°C.(68°F.) see colours card vinyl dispersion 1.65 kg/litre ( ± 0.02) 1 sq.mt./kg per 500 ÷ 600 µm thickness. 18 months in original sealed container. Substrate preparation Surfaces must be clean, without mould or humidity. Application method with water-based products or solvent-type. Tools cleaning with water Application note NOTE: To fill up thick cracks, apply several subsequent layers of IMPASTUK UNIVERSAL EXTRA, not exceeding 7 ÷ 8 mm, and allow at least one hour between them. Do not apply when the relative humidity exceeds 75%. Surface and ambient temperature must be above + 5 (41°F.) and below 35°C.(95°F.) BEWARE OF FROST. Store the product between + 5 and 35°C. Information provided in this technical data sheet is based upon our best experience and technical knowledge; it does not absolve the users from carrying out tests and preventive checks in order to verify the suitability for use. For further technical information about specific systems and/or special applications, please contact our TECHNICAL SERVICE. This note replaces all the previous ones. Please, make sure to have the latest issue. The above mentioned data are meant to facilitate our customers in the use of our products. IMPA is not responsible for applications of products carried out beyond its direct control. IMPA Spa - Via Crevada 9/E - 31020 San Pietro di Feletto (TV) Italy - tel. +39 0438 4548 - fax 0438 454915 - www.impa.it - info@impa.it

Open the catalog to page 1