IDROFIT

®

Hydraulic Rated load

Hydraulic lift with machinery in a cabinet furniture

up to 2000 kg Travel

Main features

up to 21.5 m Number of floors served

The machinery (power unit, controller, main and light switches)is contained in a proper cabinet. For the other aspects the lift complies with harmonised Standard EN81-2:1998.

up to 8 Rated speed max. 0.63 m/s Major points The machinery occupies 0,5 m
2 (width950 mm, depth 550 mm), compared to the about 3 m The cabinet dimensions remain the same, independently of the machine features (capacity, speed, number of floors served): it can be installed close to the shaft up to 15÷20 metres from the lift (depending on the hydraulic piping run).If the shaft is not fire protected, orparticular fire-fighting features are not required, the cabinet can be located inside the wall, partially or totally, thus reducing the depth required.Certified models cover the most flexiblerange of products on the market in terms of capacity, machinery size and finishes, landing and car door supplier size and type.
2 required by a traditionalmachine room (for example width 1500mm, depth 2000mm). All the components such as the mainand light switches, thermostat detectingthe temperature of the area and lamps supplier,are now placed inside a cabinet, 2 m high (minimum height to allow maintenance operations).Power unit and controller are verycompact, making installation, maintenance operations and emergency rescue easier. Safety On opening the cabinet, with a specifickey, the space necessary for maintenance and rescue operations is indicated.Machinery installation is similar to thatfor a traditional lift. The maintenance operations of themachinery do not require access inside the shaft, as lifts with the machinery unit in the pit would require.
4