| | | • Wall/ surface mounted luminaires for use as general or emergency lighting. • Polycarbonate self-extinguishing shatterproof body, reflector, and transflective diffusing screen. • The screen is fixed to the body of the fitting by means of 4 captive screws that ensure ingress Protection of IP66. • The base of the fitting is equipped with double PG11 for passing the wiring through several fittings. • Suitable for installation on a universal recessed 3-connector block (type 503) or on external watertight cable conduits with rigid tubes (0 16/20 mm) by means of a coupling (accessory). | | • The fitting is equipped with an autotest device with an LED test indicator. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP66 • F seal • IMQ-ENEC approval • IMQ Performance • Class of Insulation II | | |
| | | SA emergency operation The system is always on to show directions and emergency exits and as general illumination. | | Rest mode It permits deactivating the system for short periods. When power supply is started again, the emergency system resumes its functions too. Inhibition mode It permits deactivating the system for long inactivity periods. The emergency system needs manual restarting. | | |