Text version of the page 
Axial in-duct fans REW
Installation Operation Installation in any position. Air flow direction depending on
installation. Suitable for insertion
in ducting.Please note that
pressure drops and resistancesof ducting must be considered.For higher resistances centrifugal
fans should be considered.
Electrical connection on motor
end cap. Ensure that fan isaccessible for service. REW 90 K REW 150/2 REW 200 Axial fans for smaller to medium
air flows against low resistances.
Suitable for many applications
like room ventilation, cooling,
drying etc. Specification To be installed into ducting withnominal size 200 mm. Casingwith two stiffening rings made
from galvanised steel.
High pressure profiled 7 blade
impeller of polymer. Enclosedreversible ball bearing motorwith thermal overload protection,
tropical protection of windings
and radio suppression,
maintenance free and suitablefor continuous operation withaluminium die-cast casing.
Terminals in motor cap. Specification To be installed into ducting with
nominal size 150 mm. Casingof impact resistant polymerincorporating guide vanes. High pressure profiled 8 blade
impeller of polymer. Reversible
ball bearing motor with thermaloverload protection, maintenacefree and suitable for continuous
operation. Terminals in motor
cap.
All dimensions in mm All dimensions in mmAll dimensions in mm
Specification To be installed into ducting with
nominal size 100 mm. Casing
of impact resistant polymer
incorporating guide vanes. High pressure profiled 5 bladeimpeller of polymer. Ball bearing
motor with thermal overload
protection, maintenace free and suitable for continuous operation. Terminals in motorcap.
REW90K ρ = 1.20 kg/m
3 REW150/2 ρ = 1.20 kg/m
3 REW200
3 ∆ p ρ = 1.20 kg/m
stat. ∆ p
stat. ∆ p
stat. Pa Pa Pa V(m
3 /h) V(m
3 /h) V(m
3 /h)
TypeREW 90 KREW 150/2REW 200/4REW 200/2
AccessoriesSpeed controller with reversingswitch
Ref. No.0441044075047505 Air flow reversibleno DSEL 2
1) Ref. No. 1306 DSEL 2
2) Ref. No. 1306 DSEL 2
2) Ref. No. 1306
(not available for REW 90 K)
Air flow volume (FID) in m
3 /h105330550930
BSX Ref. No. 0240
Impeller- in mm93140200200 R.P.M. 2320210013502280 Voltage/Frequency230 V / 1 ph. / 50 Hz230 V / 1 ph. / 50 Hz230 V / 1 ph. / 50 Hz230 V / 1 ph. / 50 Hz Power Watts15294070 Current Amps0.100.130.280.33
Other accessoriesPages
Sound pressure level dB(A) at 1 m45564457
Flexible ducting,roof outletsand grilles245-256
Air intake elements271-274
Speed controllers, switchesand run-on timer 275-290
Wiring diagram No.SS-479SS-478SS-439SS-439 Protection toIP 55IP 44IP 54IP 54 Temperature range20 to +40 C20 to +40 C20 to +50 C20 to +50 C Weight in kg0.461.12.02.5
1) 4 core cable required
2) 4 core cable required
21