| | | Technical • The Trewall system has no connection or sleeve elements and can thus sustain the static and dynamic deformations of the supporting structure without any risk of "beatings" ■ The total weight of the entire system (External cladding excluded) is very light, ranging from 22 - 25 Kq/sq.m. • TheTrewall system is suspended to the slabs and therefore releases its own as well as working, transverse and seismic loads to the primary structure. • It is completely water and air proof in compliance with the regulations thanks to mechanical joints and no washers or sealing. • Its Class MO Reaction to fire makes the system smoketight in case of fire (implementation of thermo-expanding elements inside the ventilated air gap). ■ The entire Trewall walling system is much thinner than the traditional ones; thus allowing a larger internal flooring surface. | | Ecomic • Reduction of energy consumption (from 15% to 20% when compared to prefabricated solutions): the entire building, without discontinuity, benefits from a ventilated chamber, which makes the rooms quite comfortable. • Reduction of execution times: the building is water,air and fire proofed in very short times (about 1/10 of the traditional technics), making it possible to start the internal installations and finishings works such as plastering, painting, flooring etc., largely in advance and to reduce the on-site operational time. ■ Reduction of the site stopping times: the façade coatings may be installed subsequently when weather conditions are more favourable. ■ Reduction of on-site costs: the entire Trewall system is a dry installation. No building work is required. | | |
| | | Techniques • Il s'agit d'un système libre de suivre les déformations statiques et dynamiques de la structure porteuse sans contraintes. • Le poids total du système (excluant le bardage) est très léger, variable entre 22-25 Kg/m. carré. • Le système accroché aux planchers résiste aux charges statiques, accidentelles , transversales et sismiques en les déchargeant sur la structure. • Étanchéité totale à l'eau et à l'air, grâce à l'utilisation de joints mécaniques sans aucun scellement. • Réaction au feu classe MO et impénétrabilité à la fumée (emploi d'éléments thermoétendeurs dans la lame d'air). • L'épaisseur totale du système TREWALL est très réduite par rapport aux systèmes traditionnels. Par conséquent il y aura une surface intérieure plus large. | | Economiques • Réduction des temps de mise en oeuvre. Le bâtiment est mis hors d'eau, air, gel très rapidement permettant de démarrer les travaux à l'intérieur beaucoup en avance. • Réduction des temps d'arrêt chantier: le bardage de la façade pourra être mis en oeuvre en temps successifs lorsque la météo sera plus favorable. • Réduction des frais de chantier: la mise en oeuvre du système TREWALL est réalisée entièrement à sec. | | |
| | | Legenda (T) Continuous connection profile and (T) alignment to the slabs (2) T-shaped structural profile (3) Continuous integral water and air (3) proof blind structure (4) Structural and alignment profile for (4) fastening of the external claddings (5) Water-repellent semirigid insulator (6) External cladding (6) (7) Internal coating ^8) Static air chamber (8) @ Ventilated chamber (9) @ Compartment separation with (JO) fireproof insulator ^ ® Jlj Thermal cutting washer | | |
| | | Légende Charpente continue avec section en 1et alignement aux plancher Charpente porteuse avec section en T Structure métallique aveugle intégrale et continue pour l'étanchéite à l'eau et à l'air Profilé aluminium pour la fixation des bardages Isolant hydrofuge semi-rigide Bardage Vêture intérieure Chambre d'air statique Lame de ventilation Cloison ignifuge Joint d'étanchéité coupe thermique | | |