All Heat Pipe Technology, Inc. catalogues and technical brochures

P. 1

The H RM S٩ries by Heat Pipe Technology 1,000 to 50,000 cfm Systems Copper or Aluminum Fins 8 to 14 fpi spacing Standard and custom dimensions Corrosion prolective coatngs Galvanized or stainless Steel casings Drain pans Flange connections Dampers...

P. 2

The HRMSer/es Utilizing Passive Heat Pipe Heat Exchangers */ Defrost mode in very cold climates ✓ Pr٩cise temprature delivery control */ Energy savings State of the art heat exchangers based on the 3-D Heat Loop1^ by Heat Pipe Technology...

P. 1

DHP.S Site Instatled Wrap Around Systems REPLACE EXPENSIVE REHEAT FOR ENERGY SAViNGS SOLVE HIGH HUMIDITY PROBLEMS DHP-S Site Instatled Wrap Around Systems m ._* r h ^ ' j|nn|jjir _L X INDUSJBlAL LAB0&A TORIES m \ PHARMACECAL FACILITIES^ ϊH^...

P. 2

THE PRiNCiPLE Heat pipes are thermal transfer devices capable of moving large amounts of heat energy - with no moving parts - from the incoming air stream to the supply air stream in A/C units. The dehumidifier heat pipes consist of two sections, the...

P. 3

THE PROCEDURE 1. Contact Heat Pipe Technology (HPT) or your sales reprsentative with a description of the system 2. If HPT can help, HPT will provide a budget proposal subject to a site survey 3. If the customer wants to proceed, a nominal...

P. 4

DHP-S'S/te fnstalled Wrap Around Systems f Copper tubes and copper or aluminum fins f Galvanized or Stainless casings ^ f Variety of coatings for protection against corrosion f HFC heat transfer fluid for long term environmental protection f Multiple...

P. 1

P. 2

P. 3

P. 4

P. 1

P. 2

P. 3

P. 4