ISOPRO® STEEL AND WOOD CONNECTIONS - 44 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

  12. P. 30

  13. P. 40

Catalogue excerpts

Thermal insulation element for connecting steel or wooden beams Thermal insulation Sound absorption Forward constructing.

 Open the catalogue to page 1

ISOPRO® STEEL AND WOOD CONNECTION OUR CONVICTION: FORWARD CONSTRUCTING. Not just to reflect the current state of building technology, but always to be a decisive step ahead – this is our promise. This is why we constantly achieve pioneering work in all product areas. Our employees consistently use their extensive practical experience and creativity to benefit our customers. Through regular collaborative dialogue with our target groups, we develop today the products which are needed tomorrow. With our dynamics we set consistently milestones in building technology – yesterday, today and tomorrow....

 Open the catalogue to page 2

ISOPRO® STEEL AND WOOD CONNECTION Steel and wood connection Steel connection for overhanging elements Steel connection for supported elements Wood connection for overhanging elements Wood connection for supported elements We are at your service. Wherever you are, you can count on us.

 Open the catalogue to page 3

ISOPRO® STEEL AND WOOD CONNECTION TYPE OVERVIEW ISOPRO® TYPE SBM AND HBM - PAGE 6 + PAGE 26 - Connects freely projecting steel or wooden constructions with reinforced concrete structural components. Bending moments, lateral and horizontal forces are transmitted. ISOPRO® TYPE SBQ AND HBQ - PAGE 18 + PAGE 34 - Connects supported steel or wooden constructions with reinforced concrete structural components. Lateral and horizontal forces

 Open the catalogue to page 4

ISOPRO® STEEL AND WOOD CONNECTION MATERIALS AND TEST CERTIFICATES ISOPRO® COMPONENT CATALOGUE Reinforcing steel: Stainless steel: Structural steel: Insulating body: Steel strut (wood connection): B500B S275 - mat. no. 1.4571, 1.4062, 1.4362 S460 - mat. no. 1.4571 in accordance with approval Z-30.3-6 S235 NEOPOR®* rigid polystyrene foam = 0.031 W/mK S235, galvanised CONNECTING COMPONENTS CEILING Concrete: Reinforcing steel: Standard concrete in accordance with EC2 and DIN EN 206-1 Minimum concrete strength: C20/25 B500B BALCONY Structural steel: Wood: Dowel rods: Minimum grade: S235 Material, dimensions...

 Open the catalogue to page 5

ISOPRO® TYPE SBM STEEL CONNECTION ISOPRO® type SBM STEEL CONNECTION FOR OVERHANGING ELEMENTS The ISOPRO® SBM type thermal insulation element structurally connects freely projecting steel constructions with reinforced concrete structural components. At the same time, its excellent thermal properties resolve the problem of thermal bridging – a key issue in building engineering physics – at this transition. The element comprises an EPS insulating body with extremely low thermal conductivity and a structurally effective stainless steel truss construction. Both positive and negative bending moments,...

 Open the catalogue to page 6

ISOPRO® TYPE SBM STEEL CONNECTION APPLICATION EXAMPLES ISOPRO® SBM TYPE CONNECTING SITUATIONS Formwork erection brick work: Formwork erection brick work with ETICS: Special design for connection to a wall: Please contact our Application Technology department for further special constructions. Phone: +49 (0) 7742 9215-300 Fax: +49 (0) 7742 9215-319 E-mail: technik@h-bau.de The following applies for connection in the corner area: ▪▪ Only for ceiling thickness h ≥ 200 mm ▪▪ Element bearing capacity for h - 20 mm ▪▪ Always account for the 20 mm height difference on the on-site face plate.

 Open the catalogue to page 7

ISOPRO® TYPE SBM STEEL CONNECTION DESIGN AND DIMENSIONS ISOPRO® TYPE SBM 14 Q8 / SBM 14 Q10 895 80 Assembly plate Adjustment plate Adjustment plate Assembly plate

 Open the catalogue to page 8

ISOPRO® TYPE SBM STEEL CONNECTION Adjustment plate MODEL WITH WOODEN ASSEMBLY PLATE Sample illustration

 Open the catalogue to page 9

ISOPRO® TYPE SBM STEEL CONNECTION DIMENSIONING SYSTEM LENGTH The system length is measured from the trailing edge of the top plate Cleat on-site DIMENSIONING TABLE FOR CONCRETE ≥ C20/25 ISOPRO® type SBM 14 Type ISOPRO® product definition: e.g. SBM 14Q8 h200 Element height Load-bearing capacity Type designation ▪▪ The steel construction must be elevated for any deformations that arise; see page 11. ▪▪ For maximum clearance between expansion joints, see page 12. ▪▪ For maximum installation tolerances, see page 13.

 Open the catalogue to page 10

ISOPRO® TYPE SBM STEEL CONNECTION PLANNING INFORMATION DEFORMATION FACTORS TAN In order to determine the vertical displacement of the steel construction, the deformation of the ISOPRO® type SBM steel connection must be superimposed on the deformation of the connected steel construction. The values indicated are approximations. These may deviate depending on the installation situation and assembly. It may then be necessary to take other influences on deformation into consideration. We recommend providing proof in the limit state of suitability for use (quasi-continuous load combination). The steel...

 Open the catalogue to page 11

ISOPRO® TYPE SBM STEEL CONNECTION PLANNING INFORMATION CLEARANCE BETWEEN EXPANSION JOINTS A balcony plate which is firmly connected with the steel girders is essential for calculating the maximum permissible clearances between expansion joints. If the connection between the steel girders and the coating is designed to enable it to be relocated, the clearances between the connections that cannot be relocated become important. Maximum clearance between expansion joints [m] ELEMENT AND EDGE CLEARANCES NOTES: The following applies for connection in the corner area: ▪▪ Only for ceiling thickness h...

 Open the catalogue to page 12

ISOPRO® TYPE SBM STEEL CONNECTION PLANNING INFORMATION INSTALLATION TOLERANCES Initial position = upper edge of slotted hole Tolerance: +12/-0 mm Initial position = centre of slotted hole Tolerance: ±6 mm Initial position = lower edge of slotted hole Tolerance: +0/-12 mm The adjustment plate ensures simple and continuously variable height adjustment. NOTES: ▪▪ These tolerances must be indicated to the operators in the detail and working drawings ▪▪ The construction management is responsible for testing the actual shell dimensions and forwarding them to the steel workers ▪▪ The dimensional tolerances...

 Open the catalogue to page 13

ISOPRO® TYPE SBM STEEL CONNECTION ON-SITE REINFORCEMENT ISOPRO® TYPE SBM 14 Q8 2 dia. 14 Assembly plate ▪▪ Connection reinforcement for 2 dia. 14 tensile rods, design in accordance with DIN EN 1992-1-1 ▪▪ Constructional transverse reinforcement in accordance with DIN EN 1992-1-1 ISOPRO® TYPE SBM 14 QQ ≥ 800 Assembly plate Stirrup 2 dia. 6 ▪▪ Connection reinforcement for 2 dia. 14 tensile rods, design in accordance with DIN EN 1992-1-1 ▪▪ Constructional transverse reinforcement in accordance with DIN EN 1992-1-1 ▪▪ Arrange the stirrups on the element at least dia. 6 from edge banding ▪▪ Required...

 Open the catalogue to page 14

All H-BAU Technik catalogues and technical brochures

  1. SHEAR DOWELS JSD+

    40 Pages

    En
  2. SHEAR DOWELS HED

    16 Pages

    En
  3. SOUND INSULATION

    44 Pages

    En